In Situ Voltammetric Sensor of Potentially Bioavailable Inorganic Mercury in Marine Aquatic Systems Based on Gel-Integrated Nanostructured Gold-Based Microelectrode Arrays

International audienceThe development and field validation of newly designed nanostructured gold-plated gel-integrated microelectrode (Au-GIME) arrays applied to the direct in situ square wave anodic stripping voltammetry (SWASV) quantification of the potentially bioavailable inorganic mercury (Hg(II)) species in the coastal area are presented. The Au-GIME consists of arrays of 100–500 interconnected iridium (Ir)-based microdisks that are electroplated with renewable Au nanoparticles (AuNPs) or Au nanofilaments (AuNFs) and covered with an agarose gel. The gel protects the sensor surface from fouling and ensures that mass transport of analytes toward the sensor surface is by pure diffusion only and therefore independent of the ill-controlled convective conditions of the media. The responses of these sensors to direct SWASV measurements of inorganic Hg(II) at near-neutral pH were investigated first in synthetic media and then in UV-irradiated marine samples. The analytical responses were found to be correlated to the number of interconnected microelectrodes and the morphology of the nanostructured Au deposits and independent of the media composition for chloride concentration ≥0.2 M (salinity S ≥ 13) and pH ranging from 7 to 8.5. The AuNF-GIMEs have detection and quantification limits at a low pM level, fulfilling the requirement of sentinel tools for real-time monitoring of the dynamic fraction of Hg(II) in coastal area. The AuNF-GIMEs were incorporated in an in-house advanced multichannel sensing probe for remote in situ high-resolution trace metal monitoring. Field evaluation and validation were successfully performed as a part of a field study in Arcachon Bay (France), from which environmental data are presented. This work marks the first time that an autonomous electrochemical sensing probe successfully measures Hg(II) and its hourly temporal variation in situ without chemical modification of the sampl