3D numerical simulation with experimental validation of a traveling magnetic field stirring generated by a Bitter coil for silicon directional solidification process

International audienceAbstract Silicon is the most widely used raw material in photovoltaic industry; however, the quality of the silicon photovoltaic solar cells depends on the quality of the raw material (i.e. metallurgical silicon or poly-silicon) and the solidification methods used for the production of the silicon ingot from which the solar cells are produced. This study is related to how improve the quality of the final ingot in the directional solidification process; it is necessary to control the impurity segregation of silicon raw material during the processing. This control can be accomplished by adding an electromagnetic Bitter coil which can generate an external traveling magnetic field (TMF) stirring to control the hydrodynamic flow of silicon melt during the solidification process without contaminating it. To carry out this study, we used a Bridgman vertical directional solidification furnace, equipped with a cylindrical Bitter coil stirrer used in order to have the control of the silicon melt convection on the principal parameters of the solidification process, such as the growth rate, the thermal gradient and the natural convection of silicon melt. For the electromagnetic, heat exchange and silicon melt flow modelling, we used 3D numerical Multiphysics coupled models. Parallel to the numerical results we carried out experimental investigations relating to the characterization of the electromagnetic parameters. This study shows a promising effect of the applied traveling magnetic field on the final ingot quality; indeed, we have the ability to control the silicon melt flow which can affect the thermal configuration, the solidification interface shape and the segregation of impurities by changing the electric current input configuration of the Bitter coil stirrer