Nanocomposite Zn2SnO4/SnO2 powder was obtained by solid state synthesis from homogenized starting nanopowders of ZnO and SnO2, mixed in the 1:1 molar ratio, structurally and morphologically characterized using X-ray diffraction (XRD) and Scanning Electron Microscopy (SEM). Thick film paste was made by adding organic vehicles to the obtained powder. Three to five layers (layer thickness approx. 12 mu m) were screen printed on alumina substrate with small test PdAg electrodes and fired at 600 degrees C for 30 minutes. SEM analysis confirmed formation of a porous structure suitable for humidity sensing. Impedance response was studied at the working temperatures of 25 and 50 degrees C in a humidity chamber where the relative humidity (RH) was 3...
Highly sensitive and extremely thin tin oxide/zinc oxide (SnO2/ZnO) heterojunction films were prepar...
This work presents the fabrication of humidity sensor based on SnO2 sensing material derived by the ...
Humidity sensors were fabricated using zinc oxide/tin oxide (ZnO/SnO₂) composite nanorods and novel ...
Nanocomposite Zn2SnO4/SnO2 powder was obtained by solid state synthesis from homogenized starting na...
Nanocomposite Zn2SnO4/SnO2 powder was obtained by solid state synthesis from homogenized starting na...
Nanocrystalline Zn2SnO4/SnO2 powder was obtained by a solid state reaction of ZnO and SnO2 nanopowde...
Starting ZnO and SnO2 nanopowders (<100 nm) were mixed in a suitable ratio and calcined at 1050 °C f...
For the first time, a rutile phased tin oxide (SnO2) nanosheet was assembled onto a zinc oxide (ZnO)...
AbstractZinc doped tin oxide (Zn-doped SnO2) with three dimension (3D) cubic structure has been succ...
In this study, a resistive humidity sensor for moisture detection at room temperature is presented. ...
Nano-cubic Zinc Stannate (ZnSnO3) was synthesis by sol-gel immersion method growth on zinc oxide (Zn...
The present study focuses the development and the evaluation of humidity sensors based on reduced gr...
In this paper the humidity sensing properties of layers prepared by a new method for obtaining doped...
Ordered SnO2 nanostructures were prepared as humidity sensors by nanosphere lithography with the mag...
In this paper zinc stannate (ZnSnO3) nanoparticles was synthesized by a chemical precipitation metho...
Highly sensitive and extremely thin tin oxide/zinc oxide (SnO2/ZnO) heterojunction films were prepar...
This work presents the fabrication of humidity sensor based on SnO2 sensing material derived by the ...
Humidity sensors were fabricated using zinc oxide/tin oxide (ZnO/SnO₂) composite nanorods and novel ...
Nanocomposite Zn2SnO4/SnO2 powder was obtained by solid state synthesis from homogenized starting na...
Nanocomposite Zn2SnO4/SnO2 powder was obtained by solid state synthesis from homogenized starting na...
Nanocrystalline Zn2SnO4/SnO2 powder was obtained by a solid state reaction of ZnO and SnO2 nanopowde...
Starting ZnO and SnO2 nanopowders (<100 nm) were mixed in a suitable ratio and calcined at 1050 °C f...
For the first time, a rutile phased tin oxide (SnO2) nanosheet was assembled onto a zinc oxide (ZnO)...
AbstractZinc doped tin oxide (Zn-doped SnO2) with three dimension (3D) cubic structure has been succ...
In this study, a resistive humidity sensor for moisture detection at room temperature is presented. ...
Nano-cubic Zinc Stannate (ZnSnO3) was synthesis by sol-gel immersion method growth on zinc oxide (Zn...
The present study focuses the development and the evaluation of humidity sensors based on reduced gr...
In this paper the humidity sensing properties of layers prepared by a new method for obtaining doped...
Ordered SnO2 nanostructures were prepared as humidity sensors by nanosphere lithography with the mag...
In this paper zinc stannate (ZnSnO3) nanoparticles was synthesized by a chemical precipitation metho...
Highly sensitive and extremely thin tin oxide/zinc oxide (SnO2/ZnO) heterojunction films were prepar...
This work presents the fabrication of humidity sensor based on SnO2 sensing material derived by the ...
Humidity sensors were fabricated using zinc oxide/tin oxide (ZnO/SnO₂) composite nanorods and novel ...