Energy, emissions and economic impact of the new nZEB regulatory framework on residential buildings renovation: Case study in southern Spain

[EN] Spanish residential buildings built in the decade of the housing bubble (2000-2009) had to comply with the Basic Buildings Standard on thermal conditions in buildings. At the end of this period, the Basic Energy Savings Document of the Technical Building Code published in the Royal Decree 314/2006, transposing European Directive 2002/91/EC, entered into force. Recently, this regulatory framework has been updated by the Royal Decree 732/2019, which transposes European Directives 2010/31/EU, 2012/27/EU and 2018/844/EU. A case study is used to analyse the energy, emissions and economic impact of these regulatory changes on an attached house located in all municipalities of Andalusia (South of Spain). The thermal behaviour of this house is compared with the one adapted to the new regulations. The TRNSYS transient system simulation tool is used for the energy study. The house adaptation is carried out by partially modifying the envelope, including a solarthermal contribution to domestic hot water supply, and photovoltaic energy production to reduce electricity consumption. The results showed that the European objectives are greatly exceeded. Energy savings range from 69% to 127%, carbon dioxide emissions decrease by 65%-118%, and energy bills are reduced from 71% to 125%.The authors would like to thank the Conference of Rectors of Spanish Universities (CRUE) and the Spanish National Research Council (CSIC) for their support to publish this research in open access.Cerezo-Narváez, A.; Piñero-Vilela, J.; Rodríguez-Jara, E.; Otero-Mateo, M.; Pastor-Fernández, A.; Ballesteros-Pérez, P. (2021). Energy, emissions and economic impact of the new nZEB regulatory framework on residential buildings renovation: Case study in southern Spain. Journal of Building Engineering. 42:1-19. https://doi.org/10.1016/j.jobe.2021.1030541194