Documentation and analysis of a Roman anchor stock and its iconographic and epigraphic sealed elements

[EN] This paper aims to present the documentation and analysis methodology carried out on a lead trap from the ancient period, which belongs to the collection of traps in the Museum of Cádiz (Andalusia, Spain). The anchor stock had some interesting characteristics for this research. On the one hand, from the point of view of conservation and restoration, due to the alterations it presented. On the other hand, from a historical and archaeological point of view, it showed signs of reliefs on its surface hidden under the alteration products. The removal of the different layers of alteration that covered the surface during conservation and restoration treatments revealed an unpublished iconographic and epigraphic programme, as well as possible marks of use and manufacture. The poor state of conservation of the original surface made it impossible to visualise the details as a whole, so we applied photogrammetric methods, and subsequently processed models using various GIS analysis and point cloud processing softwares.Two photogrammetric models (in Agisoft PhotoScan) were made to document the trap in general: one prior to the conservation and restoration process; and a second three-dimensional (3D) model once the surface had been cleaned. The purpose of the second model was to visualise the reliefs programme in general, as well as the different surface details. The first complete 3D model of the object was used to perform a virtual reconstruction of the anchor including the elements that did not preserve, using a 3D modelling program (Blender).Nine areas of the stock surface were selected for the analyses of the various iconographic and epigraphic features, which were documented and processed in Agisoft PhotoScan. The Digital Elevation Model (DEM) and point cloud models were then processed with different analyses tools in Geographic Information System (GIS) (such as QGIS) and point cloud processing software (CloudCompare). Our results document a piece of highly interesting information from its surface consisting of reliefs of four dolphins; at least four rectangular stamps: two of them with possible inscriptions, and an anthropomorphic figure. Thanks to the comparative data, we conclude that the four dolphins were made with the same stamp during the stock manufacturing process. Further, we were able to reconstruct the dolphin stamp, partially preserved in each of the reliefs, by unifying the 3D models, thus revealing the original set. This system of stamping by means of reusable dies is well known in other elements such as amphorae but has not been studied in the specific case of lead traps.In the case of the epigraphic elements, the 3D documentation methodology revealed numerous micro-surface details, not visible under conventional documentation techniques, which could help specialists to interpret these inscriptions. Although they have not been analysed in this research, its documentation has promoted the appreciation of surface details that could refer to the manufacturing processes (moulds and tools) or the traces of use, providing historical information on this object. At the same time, the virtual reconstruction of the anchor has aided the formation of hypotheses on the dimensions and original appearance of the anchor. The different tools used, such as raster analysis using shadow mapping and point cloud alignment, proved to be very effective. They have fulfilled the established objectives and have helped to establish a possible analysis methodology for future lead traps with decorative elements. These types of artefacts recovered from underwater sites are very common in museum collections. In many cases, their state of conservation and the difficulty in handling them due to their size and weight make it difficult to document surface details. In this case, the multidisciplinary work of conservation and 3D documentation allows for hig[ES] El objetivo de este trabajo es presentar la metodología de documentación y análisis llevada a cabo sobre un cepo de plomo de época antigua perteneciente a la colección de cepos del Museo de Cádiz (Andalucía, España). La eliminación de los diferentes estratos de alteración que cubría la superficie durante los tratamientos de conservación y restauración dejó al descubierto un conjunto iconográfico y epigráfico inédito, así como posibles huellas de fabricación y uso. Sin embargo, el estado de conservación deficiente de la superficie original no permitía visualizar los detalles en su conjunto mediante técnicas convencionales, por lo que se decidió el empleo de la documentación fotogramétrica y posterior tratamiento de los modelos mediante diferentes herramientas de análisis en Sistemas de Información Geográfica (SIG) como QGIS y procesamiento de nubes de puntos (CloudCompare). El análisis tridimensional (3D) viene siendo empleado con éxito en la documentación de detalles superficiales sobre objetos arqueológicos. La combinación de los métodos tradicionales con las ventajas de la fotogrametría ha demostrado una mejora sustancial del método. Los resultados obtenidos gracias a la metodología empleada sobre la pieza objeto de esta investigación han revelado detalles microsuperficiales del conjunto iconográfico y epigráfico imposibles de apreciar mediante técnicas de documentación convencionales. El bajo coste y la facilidad de aplicación, así como las posibilidades de procesamiento posterior de los datos obtenido con diferentes programas, hacen de esta metodología una herramienta muy útil frente a otras técnicas. Los datos microsuperficiales obtenidos, junto con los obtenidos mediante la reconstrucción 3D aportan una valiosa información para la interpretación del objeto. Las tareas llevadas a cabo también plantean una metodología de estudio eficaz para el análisis de otros cepos de plomo, una tipología de material muy abundante en colecciones de museos a lo largo de todo el Mediterráneo y parte del Atlántico y cuyo estudio permitirá conocer más sobre las anclas de época antigua, sus características morfológicas, procesos de fabricación, elementos epigráficos e iconográficos, mecanismos de alteración, etc. Lo más destacado:• Se presenta la metodología de documentación 3D llevada a cabo para estudiar y analizar un cepo de plomo de época antigua y su conjunto iconográfico y epigráfico inédito.• La aplicación de programas SIG y de procesamiento de nubes de puntos ha permitido documentar detalles microsuperficiales de la superficie del cepo no apreciables a simple vista.• El análisis volumétrico y el modelado 3D presenta una ventaja a la hora de conocer más detalles sobre las anclas con cepos de plomo de época antigua.Este trabajo ha contado con el apoyo del Ministerio de Ciencia e Innovación y Universidades, Agencia Estatal de Investigación y la Unión Europea bajo el proyecto financiado EQC2018-004947-P.Fernandez-Tudela, E.; Zambrano, LC.; Lagóstena, LG.; Bethencourt, M. (2022). Documentación y análisis de un cepo de ancla romano y sus elementos iconográficos y epigráficos sellados. Virtual Archaeology Review. 13(26):147-162. https://doi.org/10.4995/var.2022.153491471621326Andreu, J., & Serrano, P. (2019). Contributions of the digital photogrammetry and 3D modelling of Roman inscriptions to the reading of damaged tituli: An example from the Hispania Tarraconensis (Castiliscar, Saragossa). Digital Applications in Archaeology and Cultural Heritage, 12, e00091. https://doi.org/10.1016/j.daach.2019.e00091Bennison-Chapman, L. E., & Hager, L. D. (2018). Tracking the division of labour through handprints: Applying Reflectance Transformation Imaging (RTI) to clay 'tokens' in Neolithic West Asia. Journal of Archaeological Science, 99, 112-123. https://doi.org/10.1016/j.jas.2018.09.004Bravo, J. (1976a). Evolución y técnica en la construcción de anclas antiguas. En Ancorae Anticuae I. Ceuta: Sala Municipal de Arqueología.Bravo, J. (1976b). Cepos de anclas con relieves recuperados en el Mediterráneo Occidental. En Ancorae Anticuae I. Ceuta: Sala Municipal de Arqueología.Cano, A. I. (2003). Aproximación al estudio de la minería del plomo en Extremadura y sus usos en época romana. Bolskan: Revista de arqueología del Instituto de Estudios Altoaragoneses, (20), 119-130.Carrero-Pazos, M., & Espinosa-Espinosa, D. (2018). Tailoring 3D modelling techniques for epigraphic texts restitution. Case studies in deteriorated Roman inscriptions. Digital Applications in Archaeology and Cultural Heritage, 10, e00079. https://doi.org/10.1016/j.daach.2018.e00079Carrero-Pazos, M., Vilas-Estévez, B., & Vázquez Martínez, A. (2018). Digital imaging techniques for recording and analysing prehistoric rock art panels in Galicia (NW Iberia). Digital Applications in Archaeology and Cultural Heritage, 8, 35-45. https://doi.org/10.1016/j.daach.2017.11.003Cerrillo-Cuenca, E., Bueno-Ramírez, P., & de Balbín-Behrmann, R. (2019). "3DMeshTracings": A protocol for the digital recording of prehistoric art. Its application at Almendres cromlech (Évora, Portugal). Journal of Archaeological Science: Reports, 25, 171-183. https://doi.org/10.1016/j.jasrep.2019.03.010Chatonnet, F. B. (2007). Première ancre à inscription néopunique. Orientalia, 76(1), 24-29.Ferrer i Jané, J., & Sinner, A. G. (2019). Baitolo, una doble inscripción ibérica en un cepo de ancla de plomo del siglo I a.C. Palaeohispanica. Revista sobre lenguas y culturas de la Hispania Antigua, (19), 147-167. https://doi.org/10.36707/palaeohispanica.v0i19.207Fiorini, A. (2018). Il metodo fotografico RTI (reflectance transformation imaging) per la documentazione delle superfici archeologiche. L'applicazione ai materiali di età protostorica. Archeologia e Calcolatori, 29, 241-258. https://doi.org/10.19282/ac.29.2018.20García, C., & López, M. D. (1980). Elementos de anclas antiguas del Museo de Cádiz. Boletín del Museo de Cádiz,2, Cádiz, 67-72.Goldman, Y., Linn, R., Shamir, O., & Weinstein-Evron, M. (2018). Micro-RTI as a novel technology for the investigation and documentation of archaeological textiles. Journal of Archaeological Science: Reports, 19, 1-10. https://doi.org/10.1016/j.jasrep.2018.02.013Hadas, G., Liphschitz, N., & Bonani, G. (2005). Two ancient wooden anchors from Ein Gedi, on the Dead Sea, Israel. International Journal of Nautical Archaeology, 34(2), 299-307. https://doi.org/10.1111/j.1095-9270.2005.00061.xHaldane, D. (1984). The wooden anchor. Texas: Texas A&M University.Hristov, I. (2013). Antique stone anchors, stone and lead anchor stocks from the collection of The National Museum of History. End of 2nd ML B.C. - 3rd century A.D. Sofia: UNICART.Kapitän, G. (1984). Ancient anchors-technology and classification. The International Journal of Nautical Archaeology, 13(1), 33-44. https://doi.org/10.1111/j.1095-9270.1984.tb01175.xKuleff, I., Djingova, R., Alexandrova, A., Vakova, V., & Amov, B. (1995). INAA, AAS, and lead isotope analysis of ancient lead anchors from the black sea. Journal of Radioanalytical and Nuclear Chemistry, 196(1), 65-76. https://doi.org/10.1007/BF02036290Lech, P., Matera, M., & Zakrzewski, P. (2021). Using reflectance transformation imaging (RTI) to document ancient amphora stamps from Tanais, Russia. Reflections on first approach to their digitalisation. Journal of Archaeological Science: Reports, 36, 102839. https://doi.org/10.1016/j.jasrep.2021.102839López-Martínez, T., García-Bueno, A., & Medina-Flórez, V. J. (2018). New methodology for the assessment of cleaning treatments. Applications of photogrammetry for restoration. Journal of Cultural Heritage, 30, 117-123. https://doi.org/10.1016/j.culher.2017.09.019Martínez, A. (2011). Iconografía sagrada fenicio-púnica en las monedas de Hispania siglos III al I a. C. El Futuro del Pasado : Revista Electrónica de Historia, 2, 579-600. https://doi.org/10.14201/fdp.24666Nicolae, C., Nocerino, E., Menna, F., & Remondino, F. (2014). Photogrammetry applied to problematic artefacts. The International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences, XL-5, 451-456. https://doi.org/10.5194/isprsarchives-XL-5-451-2014Perea, S. (2004). Zeus Kásios Sózon y Afrodita Sózousa, divinidades protectoras de la navegación. A propósito de dos cepos de anclas romanas procedentes del Cabo de Palos. Mastia: Revista del Museo Arqueológico Municipal de Cartagena, (3), 95-111.Perrone, M. (1979). Ancorae antiquae: Per una cronologia preliminare delle ancore del Mediterraneo. Roma: L'Erma di Bretschneider.Poigt, T. (2015). Volume measurement by photogrammetry. Applications for the weighing metrology studies. En I International Conference on Metrology for Archaeology, 1, (pp.197-202), Benevento, Italy.Ramon , J. (1995). Las ánforas fenicio-púnicas del Mediterráneo central y occidental. Barcelona: Universitat de Barcelona.Rosen, B., & Galili, E. (2007). Lead use on Roman ships and its environmental effects. International Journal of Nautical Archaeology, 36(2), 300-307. https://doi.org/10.1111/j.1095-9270.2007.00145.xSolem, D.-Ø. E., & Nau, E. (2020). Two new ways of documenting miniature incisions using a combination of image-based modelling and reflectance transformation imaging. Remote Sensing, 12(10), 1626. https://doi.org/10.3390/rs12101626Torregrosa-Fuentes, D., Spairani-Barrio, Y., Huesca-Tortosa, J. A., Cuevas-González, J., & Torregrosa-Fuentes, A. J. (2018). Application of automated photogrammetry and lighting techniques with GIS tools for visualisation and analysis of a slab with anthropomorphous reliefs. Virtual Archaeology Review, 9(19), 114-124. https://doi.org/10.4995/var.2018.9531Valente, R., & Barazzetti, L. (2020). Methods for ancient wall graffiti documentation: overview and applications. Journal of Archaeological Science: Reports, 34, 102616. https://doi.org/10.1016/j.jasrep.2020.102616Zotkina, L. V., & Kovalev, V. S. (2019). Lithic or metal tools: Techno-traceological and 3D analysis of rock art. Digital Applications in Archaeology and Cultural Heritage, 13, e00099. https://doi.org/10.1016/j.daach.2019.e0009