EXPERIMENTAL ANALYSIS OF DOUBLE BOX WING UAV.

ABSTRACT In an attempt to reduce the induced drag on a wing, Prandtl found that induced drag reduced significantly by highly increasing the number of vertically offset wings. The same result could be obtained by joining the wingtips of two vertically offset wings. This helped increase payload capacity and also reduced fuel consumption and emissions. Such a wing configuration came to be known as Prandtl’s box wing. In this work, the design and analysis of a box wing aircraft model has been carried out. The preliminary analysis is performed using XFLR5, and the computational analysis is done with the help of ANSYS 18.2. The values of experiments are computed with the help of MATLab R2017. The box wing model has shown a nearly 53.74% reduction in drag as compared with conventional wing models. The computational results of drag have been compared and validated with the results of analytical and the experimental results from the wind tunnel and found to be within 10% of the computational result. Since the drag of the box wing is significantly lesser than the conventional wings the box wing is a feasible configuration which can be used to design various aircrafts including Unmanned Aerial Vehicles and Commercial Planes