Development and study of an amperometric biosensor for the in vitro measurement of low concentration of putrescine in blood

An amperometric biosensor was developed for the in vitro determination of putrescine in blood samples because elevated level of putrescine in blood can be a diagnostic indicator of certain kinds of cancer. The electrochemical transducer consisted of a flat form, three electrode amperometric micro-cell fabricated with thin film photolithography on flexible Kapton® substrate. An immobilized putrescine oxidase (PUO) layer provided the biocatalytic oxidation of the putrescine, while the generated hydrogen peroxide was detected on the platinum-working electrode. An electropolymerized poly(m-phenylenediamine) (pPDA) size-exclusion layer was used to protect the working electrode from fouling and to prevent signal generation by common electroactive interferents present in blood. The preparation of the biocatalytic enzyme- and outer protective layers was optimized for improved sensitivity and response time. A detection limit of 50 nM was achieved in pH-adjusted whole blood samples, which is below pathological levels. © 2002 Elsevier Science B.V. All rights reserved