An Android and visual c-based controller for a Delta Parallel Robot for use as a classroom training tool

This report will show the development of a Delta Parallel robot, to aid in teaching the basics of robotic motion programming. The platform developed will be created at a fraction of the cost of conventional commercial training systems. This report will therefore show the development procedure as well as the development of some of the example training material. The system will use wireless serial data communication in the form of a Bluetooth connection. This connection will allow an Android tablet, functioning as the human-machine interface (HMI) for the system, to communicate with the motion controller. The motion controller is based in the C environment. This will allow future development of the machine, and allow the system to be used on an integral level, should the trainers require an in depth approach. The motion control software will be implemented on a RoBoard, a development board specifically designed for low- to mid-range robotics. The conclusion of this report will show an example task being completed on the training platform. This will demonstrate some of the basic robotic motion programming aspects which include point to point, linear, and circular motion types but will also include setting and resetting outputs. Performance parameters such as repeatability and reproducibility are important, as it will indirectly show the level of ease with which the system can be manipulated from the software. Finally, the results will be briefly discussed and some recommendations for improvements on the training system and suggestions for future development will be given