Numerical Analysis of the Primary Gas Boundary Layer Flow Structure in Laser Fusion Cutting in Context to the Striation Characteristics of Cut Edges

In cutting metals with solid-state lasers, a characteristic cutting edge structure is generated whose formation mechanisms still elude a consistent explanation. Several studies suggest a major contribution of the pressurized gas flow. Particular emphasis must be devoted to the gas boundary layer and its developing flow characteristics, since they determine the heat and momentum exchange between the cutting gas and the highly heated melt surface and thus the expulsion of the molten material from the kerf. The present study applies a CFD simulation model to analyze the gas flow during laser cutting with appropriate boundary conditions. Specifically, the gas boundary layer development is considered with a high spatial discretization of this zone in combination with a transition turbulence model. The results of the calculation reveal for the first time that the boundary layer is characterized by a quasi-stationary vortex structure composed of nearly horizontal geometry- and shock-induced separation zones and vertical vortices, which contribute to the transition to turbulent flow. Comparison of the results with the striation structure of experimental cut edges reveals a high agreement of the location, orientation, and size of the characteristic vortices with particular features of the striation structure of cut edges