Ultraviolet Nanosecond Laser Treatment to Reduce the Friction Coefficient of Silicon Carbide Ceramics

The determination of the possibility for the reduction of the friction coefficient of ceramic parts from silicon carbide by pulse-periodic treatment with an ultraviolet nanosecond laser was carried out in the framework of this research. The gas-dynamic seal of the compressor rotor of the gas-turbine engine after hot isostatic pressing and mechanical treatment was exposed to surface microstructuring in a pulse-periodic mode. For experimental investigations, a laser with a maximum energy of the pulse of 50 µJ, a wavelength of 355 nm, and a pulse duration below 10 ns was used. It was determined that the surface quality was improved, and the surface roughness was reduced as a consequence of the realized laser polishing modes in the beam exposure area. The average value of the friction coefficient of the ceramic material surface decreased by 15% as result of pulse-periodic laser processing