Reinforcement of carboxylated nitrile rubber latex films by surface modified nanosilica

Carboxylated acrylonitrile butadiene rubber (XNBR) is synthetic elastomer which inherent number of physical and chemical properties such as comparable barrier protection, good puncture and chemical resistance and high durability under storage. Although that there is a problem associated with synthetic elastomers that they are typically not self-reinforcing elastomers. Therefore, reinforcing fillers are incorporated to improve the properties of the compounds. Silica is extensively used for latex products. Nanofillers can impart more advanced properties to the final nanocomposite than micro fillers. Surface modification has been introduced to avoid the incompatibility between inorganic filler silica and organic XNBR matrix Role of surface modifiers in this study play dual role, as a capping agent: to control the size of nanoparticles & as a coupling agent: to develop compatibility between rubber and filler. Synthetic surface modifiers i.e. Polymethacrylic acid & Polymethacrylic acid ethyl hexyl acrylate and natural surface modifiers i.e. cellulose, collagen, chitosan & gelatin were used in this study. The FTIR analysis confirm that the surface of nanosilica particles has been successfully modified with acrylic polymers, forming ester bonds between carboxylic groups of acrylic polymers and surface silanol groups of nanosilica. TGA confirms the successful surface modification resulting lower weight loss; indicating small number of free surface silanols groups are present on the silica surface. XRD analysis revealed the amorphous nature of unmodified and all modified nanosilica particles. SEM results help to monitor the particle shape, size and agglomerations of synthesized particles. Evaluation of XNBR vulcanizate properties of micro silica, unmodified nanosilica, acrylic polymer modified nanosilica and natural polymer modified nanosilica filled vulcanizates was carried out. The results show that addition of small quantities of nanosilica causes an increase of mechanical properties of XNBR vulcanizates, while high filler loading of nanosilica appear to decrease the mechanical properties due to the aggregation of nanosilica particles. 2% PMAA and 2% cellulose modified nanosilica filled vulcanizates show balance strength with stretch & comfort properties for the glove manufacturing