Bentonite-supported nano zero-valent iron composite as a green catalyst for bisphenol A degradation: Preparation, performance, and mechanism of action

Bisphenol A (BPA) is a toxic environmental pollutant commonly found in wastewater. Using non-toxic materials and eco-friendly technology to remove this pollutant from wastewater presents multiple advantages. Treatment of wastewater with clay minerals has received growing interest because of the environment friendliness of these materials. Bentonite is a 2:1 layered phyllosilicate clay mineral that can support nano-metal catalysts. It can prevent the agglomeration of nano-metal catalysts and improve their activity. In this article, a green catalytic nano zero-valent iron/bentonite composite material (NZVI@bentonite) was synthesized via liquid-phase reduction. The average size of NZVI was approximately 40–50 nm. Good dispersion and low aggregation were observed when NZVI was loaded on the surface or embedded into the nanosheets of bentonite. Degradation of BPA, a harmful contaminant widely found in wastewater at relatively high levels, by NZVI@bentonite was then investigated and compared with that by pristine NZVI through batch Fenton-like reaction experiments. Compared with pristine NZVI and bentonite alone, the NZVI@bentonite showed a higher BPA degradation ratio and offered highly effective BPA degradation up to 450 mg/g in wastewater under optimum operating conditions. Adsorption coupled with the Fenton-like reaction was responsible for BPA degradation by NZVI@bentonite. This work extends the application of NZVI@bentonite as an effective green catalyst for BPA degradation in aqueous environments.