The curing process of two biobased adhesives: pine tanninhexamine (TH) and organosolv lignin non-isocyanate polyurethane (NIPU), suitable for interior nonstructural use, were compared with commercial urea-formaldehyde (UF) adhesive. Changes in chemical structure before and after the curing process were observed with Fouriertransform infrared spectroscopy (FTIR). The process of adhesive curing was monitored with differential scanning calorimetry (DSC) and the automated bonding evaluation system (ABES). Both DSC and ABES measurements confirmed UF as the fastest and NIPU as the slowest curing adhesive observed. Taking into account the ABES results, the optimal pressing parameters for the TH adhesive would be 4 min at 175°C, for the NIPU adhesi...
The aim of this study is to assess the curing behaviour and thermal properties of phenol–formaldehyd...
Effects of room-temperature curing time on the curing behavior of resorcinol formaldehyde (RF) resin...
International audienceMaritime pine tannins from the two suppliers BIOLANDES and DRT were used in co...
The development of biomaterials-based adhesives is one of the main research directions for the wood-...
In this study, formaldehyde-free bioresin adhesives were synthesised from lignin and tannin, which w...
In this study, formaldehyde‐free bioresin adhesives were synthesised from lignin and tannin, which w...
Svetovna poraba lepil za les se vsako leto veča. Ker so najpogosteje uporabljana sintetična lepila, ...
Differential scanning calorimetry (DSC) was used to evaluate the curing kinetics of two commercial ...
International audienceNetwork formation, cure characteristics and bonding performance of tannin-base...
Phenol-formaldehyde adhesives are in the wood industry most commonly used for bonding of structural ...
Lignin-based polyol was obtained via oxyalkylation reaction with propylene carbonate using eucalyptu...
In recent years, the shortcomings of products bonded with adhesives of conventional resins (e.g. ure...
In this paper, thermogravimetric (TG) analysis was carried out to make clear the curing properties o...
This is a study of concept on the initial application for wood adhesives totally biosourced from the...
Tannin from mahogany bark extract contains polyphenols that could be used in adhesives. In this stud...
The aim of this study is to assess the curing behaviour and thermal properties of phenol–formaldehyd...
Effects of room-temperature curing time on the curing behavior of resorcinol formaldehyde (RF) resin...
International audienceMaritime pine tannins from the two suppliers BIOLANDES and DRT were used in co...
The development of biomaterials-based adhesives is one of the main research directions for the wood-...
In this study, formaldehyde-free bioresin adhesives were synthesised from lignin and tannin, which w...
In this study, formaldehyde‐free bioresin adhesives were synthesised from lignin and tannin, which w...
Svetovna poraba lepil za les se vsako leto veča. Ker so najpogosteje uporabljana sintetična lepila, ...
Differential scanning calorimetry (DSC) was used to evaluate the curing kinetics of two commercial ...
International audienceNetwork formation, cure characteristics and bonding performance of tannin-base...
Phenol-formaldehyde adhesives are in the wood industry most commonly used for bonding of structural ...
Lignin-based polyol was obtained via oxyalkylation reaction with propylene carbonate using eucalyptu...
In recent years, the shortcomings of products bonded with adhesives of conventional resins (e.g. ure...
In this paper, thermogravimetric (TG) analysis was carried out to make clear the curing properties o...
This is a study of concept on the initial application for wood adhesives totally biosourced from the...
Tannin from mahogany bark extract contains polyphenols that could be used in adhesives. In this stud...
The aim of this study is to assess the curing behaviour and thermal properties of phenol–formaldehyd...
Effects of room-temperature curing time on the curing behavior of resorcinol formaldehyde (RF) resin...
International audienceMaritime pine tannins from the two suppliers BIOLANDES and DRT were used in co...