Design, optimization and construction of a prototype for a thermochromic Trombe wall

Most of the existing buildings in Spain lack any thermal insulation in their envelope. They are in urgent need to be refurbished to reduce their energy consumption. The standard solution for the rehabilitation of facades is to incorporate thermal insulation materials to reduce heat transmission. This work proposes an extension of the conventional approach: the installation of Trombe walls on sunny facades incorporating an outer layer of thermochromic mortar, the thermochromic Trombe wall (TTW). This improves the energy performance of the existing buildings by enhancing their solar gains. This paper describes the design and configuration of the new TTW system. While traditional solutions can be evaluated with a simple heat transfer equation, a complex energy model is needed to evaluate TTW. Energy simulation is used to determine parameters that influence thermal performance. Thermochromic mortar transition temperature is designed to achieve maximum efficiency. The results obtained from the parametric study were used to determine the aspects of the construction of the first prototype on a laboratory test cell. The information obtained from the experiment will be used for the calibration of the energy model that will establish the potential for the incorporation of the TTW to the existing buildings.Peer reviewe