Experimental Investigation on Mechanical Properties of Carbon Nanotube-Reinforced Epoxy Composites for Automobile Application

Carbon nanotubes are established as a superior form of carbon. These have superior characteristics in terms of mechanical and chemical properties when compared to the other fibres available. High-strength fibres can be employed in a composite in a short form and mass-produced to fulfil high demands in composite applications. These composites can meet the strength requirements of nonstructural and structural components in a wide range of industries. Because of their light weight and excellent strength-to-weight ratio, these composites can be used in a wide range of applications. With Young’s modulus as high as 1 TPa and tensile strength up to 63 GPa, they are among the stiffest and strongest fibres. There is currently a lot of interest in using carbon nanotubes in a matrix to take advantage of these features. There have been a variety of polymer matrices used, and nanotube/ceramic and nanotube/metal composites are gaining popularity. The study of these materials is an ongoing process, as researchers and design engineers have yet to realize their full potential. Carbon nanotubes (CNTs) are used in this study to create the composite with the resin. The percentage of CNT used as a filler material in the composite is varied from 1 to 4 percent, with the best percentage chosen for optimal mechanical properties