A Novel Accelerated Aging Test for Floats in a Floating Photovoltaic System

Countries around the globe have recently been actively developing a new type of solar power system known as the floating photovoltaic (FPV) system. The FPV system is advantageous in terms of efficiency and is economic; however, the environmental conditions on the surface of water are harsher than on the ground, and regulations or standards of the long-term durability of the float are insufficient. As a result, this study aims to investigate the durability of the float through three types of accelerated aging tests, including the damp heat test, the ozone-aging test, and the ultraviolet (UV) aging test. After the 7-day damp heat test (80 °C/95% RH), the results revealed that four groups of high-density polyethylene (HDPE) extrusion specimens neither produced more oxygen-containing functional groups, according to Fourier-transform infrared (FTIR) spectrum analysis, nor became more easily broken by the tensile test. Furthermore, more oxygen-containing functional groups were produced after the 7-day ozone-aging test (80 °C/95% RH/500 ppm) than the 17-day UV-aging test (60 °C/0% RH/60 kW·h·m−2). On the contrary, UV aging would make HDPE specimens harder and more brittle than ozone aging. To conclude, both ozone- and UV-aging tests can evaluate the durability of the float quickly and efficiently