Evaluation of the mulch films biodegradation in soil: a methodological review

Plastic mulch films are widely used in agriculture, but most are not biodegradable in soil. Biodegradable mulch films are blends of different polymers whose composition-ratios vary notably from one product to another. Their degradation rates vary greatly according to the physio-chemical characteristics of the product and according to the properties of the soil and its microbial activity. The objective of this review is to provide an overview of the methods used to estimate the biodegradation performances of biodegradable plastics in the soil. In line with this objective, 80 papers were selected and systematically analyzed to extract information on the characteristics of the soil used in the experiments, the type of polymer analyzed, and the methods used to estimate biodegradation in soil environment. Our systematic analysis showed that studies were carried out under both laboratory-controlled and open-field conditions, with different approaches involving visual analysis, mass loss measurements, spectroscopy, and CO2 measurements. A linear estimation of biodegradation performance for four of the most common biodegradable polymers (i.e., polybutylene succinate, polybutylene succinate-co-adipate, polylactic acid, and polybutylene adipate-co-terephthalate), either pure or blended, showed a very wide range of results that appear only partially comparable. Many of the analyzed papers did not report soil characteristics at all, despite soil being one of the most important factors in the biodegradation process. Although methodologies for estimating biodegradation are well developed, at least under laboratory-controlled conditions, there is a need for a shared methodology to make results comparable among different experiments. Within such a shared methodology, visual analysis or mass loss measurements, despite not being able to scientifically prove the biodegradation of polymers, should not be discarded a priori as they might be useful indicators especially for open field experiments. When using indirect biodegradation indicators such as visual analysis or mass loss, it is necessary to couple them with CO2 measurements or to use materials whose biodegradability in the soil environment has already been tested