Recognition method of radar intra-pulse modulation type based on signal square spectrum bandwidth ratio

Abstract The twenty-first century is the era of electronic warfare and information warfare. The focus is of the battle between all parties. CEEMD can link the time domain and frequency domain, describe the two-dimensional time–frequency characteristics of the signal, and draw the time–frequency diagram of the signal, so as to reduce the noise signal and improve the signal-to-noise ratio of the signal. The purpose of this paper was to study how to adjust the signal square spectrum bandwidth ratio in the subject of identifying the intra-pulse modulation of radar, so as to solve the problem of identifying the type of radar intra-pulse modulation. The experimental results in this paper show that the decomposition result of EEMD is incomplete and the signal reconstruction error is larger. Compared with the previous two methods, not only the CEEMD method can effectively suppress modal aliasing, but also the decomposition result is complete; the signal reconstruction error is very small, and the decomposition results close to ideal value. The interleaving filter with a bandwidth ratio of 1:2 can divide the 100 GHz channel spacing into asymmetric output spectra with bandwidths greater than 60 GHz and 30 GHz, which effectively improves the current mix of 10 Gb/s and 40 Gb/s The bandwidth utilization of the system illustrates the success of the simulation experiment