Micro-Topography Mapping through Terrestrial LiDAR in Densely Vegetated Coastal Environments

Terrestrial Light Detection And Ranging (LiDAR), also referred to as terrestrial laser scanning (TLS), has gained increasing popularity in terms of providing highly detailed micro-topography with millimetric measurement precision and accuracy. However, accurately depicting terrain under dense vegetation remains a challenge due to the blocking of signal and the lack of nearby ground. Without dependence on historical data, this research proposes a novel and rapid solution to map densely vegetated coastal environments by integrating terrestrial LiDAR with GPS surveys. To verify and improve the application of terrestrial LiDAR in coastal dense-vegetation areas, we set up eleven scans of terrestrial LiDAR in October 2015 along a sand berm with vegetation planted in Plaquemines Parish of Louisiana. At the same time, 2634 GPS points were collected for the accuracy assessment of terrain mapping and terrain correction. Object-oriented classification was applied to classify the whole berm into tall vegetation, low vegetation and bare ground, with an overall accuracy of 92.7% and a kappa value of 0.89. Based on the classification results, terrain correction was conducted for the tall-vegetation and low-vegetation areas, respectively. An adaptive correction factor was applied to the tall-vegetation area, and the 95th percentile error was calculated as the correction factor from the surface model instead of the terrain model for the low-vegetation area. The terrain correction method successfully reduced the mean error from 0.407 m to −0.068 m (RMSE errors from 0.425 m to 0.146 m) in low vegetation and from 0.993 m to −0.098 m (RMSE from 1.070 m to 0.144 m) in tall vegetation