Photocatalytic Degradation of Diazo Dye over Suspended and Immobilized TiO₂ Catalyst in Swirl Flow Reactor: Kinetic Modeling

The degradation kinetics of Direct Blue 15 (DB15), a diazo dye, were studied over a suspended and immobilized TiO2 catalyst. For all experiments, the kinetics experiments were performed in a swirl flow photoreactor under the influence of UV light. The effect of different parameters: dye concentration, catalyst loading, and light intensity, on the DB15 kinetics was investigated. The kinetic rates were assessed using apparent (ka) approach, a single value of reaction rate (kr) and adsorption constant (K), and approach of kr as of variable. The DB15 mineralization was discussed as well. Using a dip-coating device, the P25 catalyst was deposited on a Pyrex glass. The thin film surface characterization was examined. The coated catalyst was evaluated by checking the effect of two variables: initial dye concentration and light intensity on the DB15 kinetics. In terms of the ka approach, the results demonstrated that DB15 degradation is described by the pseudo first-order kinetics model. The Langmuir-Hinshelwood (L-H) model was fitted well with the experimental data for the number of process variables. L-H constant kr was determined as a function of three parameters: initial dye concentration, catalyst loading, and light intensity. The ka values were evaluated and compared with experimental results. In terms of three variables, ka can be expressed as ka=0.15 [C]o−0.69 [W]0.73 I0.91 1+0.17 [C]o while the empirical model results in the following expression, ka=0.77 [C]o−1.65 [W]0.73 Io0.89. It was observed that 83.64% mineralization was achieved after a period of 16 hrs. In terms of immobilized catalyst, the DB15 degradation kinetics was described by a pseudo first-order model for different dye concentrations. Meanwhile, a power-law model described the impact of light intensity on dye kinetics. In addition, the coated catalyst was successfully reusable with high efficiency for up to four cycles