The effect of KrF excimer laser irradiation on the optical and electrical properties of epitaxial wafers with a p-GaN surface were investigated at different laser energy densities and pulse numbers. The laser-irradiated samples were annealed in oxygen. The laser irradiation-induced changes in optical and electrical properties of GaN epitaxial wafers were examined using PL, I–V, XPS, SIMS, and Hall effect measurements. Experimental results show that under an appropriate laser-irradiated condition, optical and electrical properties of the samples were improved to different degrees. The samples which were annealed after laser irradiation have better electrical properties such as the hole concentration and sheet resistance than those without an...
Pulsed laser treatments have been performed in GaN samples of both n- and p-type conductivity. The l...
With this paper we describe recent results on the physical mechanisms responsible for the gradual de...
This paper analyzes the stability of gallium nitride blue light emitting diodes (LEDs) at high tempe...
Electrical properties of metal contacts on laser-irradiated n-type and p-type GaN surfaces were inve...
In this thesis, the objective is to study the effects of KrF excimer (248 nm) laser processing on ga...
We report experimental investigation of laser-assisted debonding of GaN-based light emitting diodes ...
A KrF (248 nm) excimer laser with a 38 ns pulse width was used to study pulsed laser annealing of Al...
Detailed investigations of laser-debonded GaN-based light-emitting diodes (LEDs) grown by metal-orga...
A KrF (248 nm) excimer laser with a 38 ns pulse width was used to study pulsed laser annealing (PLA)...
The electrical properties of metal contacts on laser-irradiated n-type GaN were investigated using s...
The development of a process chain allowing for rapid prototyping of GaN-based light-emitting diodes...
[[abstract]]A study of laser processing of gallium nitride (GaN) material is reported. A pulsed KrF ...
The luminescent properties of GaN thin films grown by pulsed laser deposition have been studied to u...
Electronic surface properties, optical and electrical characteristics of p-type Mg-doped Gallium Nit...
Despite the recent progresses in the technology of GaN-based laser diodes (LDs), there is a number o...
Pulsed laser treatments have been performed in GaN samples of both n- and p-type conductivity. The l...
With this paper we describe recent results on the physical mechanisms responsible for the gradual de...
This paper analyzes the stability of gallium nitride blue light emitting diodes (LEDs) at high tempe...
Electrical properties of metal contacts on laser-irradiated n-type and p-type GaN surfaces were inve...
In this thesis, the objective is to study the effects of KrF excimer (248 nm) laser processing on ga...
We report experimental investigation of laser-assisted debonding of GaN-based light emitting diodes ...
A KrF (248 nm) excimer laser with a 38 ns pulse width was used to study pulsed laser annealing of Al...
Detailed investigations of laser-debonded GaN-based light-emitting diodes (LEDs) grown by metal-orga...
A KrF (248 nm) excimer laser with a 38 ns pulse width was used to study pulsed laser annealing (PLA)...
The electrical properties of metal contacts on laser-irradiated n-type GaN were investigated using s...
The development of a process chain allowing for rapid prototyping of GaN-based light-emitting diodes...
[[abstract]]A study of laser processing of gallium nitride (GaN) material is reported. A pulsed KrF ...
The luminescent properties of GaN thin films grown by pulsed laser deposition have been studied to u...
Electronic surface properties, optical and electrical characteristics of p-type Mg-doped Gallium Nit...
Despite the recent progresses in the technology of GaN-based laser diodes (LDs), there is a number o...
Pulsed laser treatments have been performed in GaN samples of both n- and p-type conductivity. The l...
With this paper we describe recent results on the physical mechanisms responsible for the gradual de...
This paper analyzes the stability of gallium nitride blue light emitting diodes (LEDs) at high tempe...