Feature extraction and process planning of integrated hybrid additive-subtractive system for remanufacturing

Discussion regarding hybrid manufacturing has dominated research in recent years. By synergistically integrating additive and subtractive manufacturing within a single workstation, the relative benefits of each manufacturing strategy are leveraged. The ability to add, remove feature flexibly enables remanufacturing end-of-life components into a "new" part with new features and functionalities. However, in the remanufacturing context, the process planning for hybrid additive-subtractive manufacturing is still an unsolved research topic. In general, a hybrid remanufacturing process is signified by an alternating sequence of additive and subtractive operations that alternatively add and remove materials on a used part, which results in a non-unique process planning. For determining an optimal sequence for hybrid remanufacturing, a quantitative evolution mechanism is demanded. Moreover, the constraints in process planning are required to be considered. For example, the collision avoidance between the workpiece and the material-dispensing nozzle is one of the most critical limitations that affect the alternating sequence. To fill the gap, automated feature extraction and cost-driven process planning method for hybrid remanufacturing are proposed in this paper. The feature extraction, developed under the level set framework, can extract optimal and collision-free additive-subtractive features. Then, the hybrid process planning task is formulated into an integer programming model with cost estimations. A case study is conducted, and the results confirm the correctness and effectiveness of the proposed method