Indoor and Outdoor Performance of an Enhanced Photovoltaic Panel through Graphene/Fins/Phase Change Materials

The operative temperature of a photovoltaic cell influences the electric conversion yield. This can be enhanced by cooling the panel. Among the studied solutions, phase change materials (PCM) exploit latent heat and absorb a large amount of energy at a nearly constant temperature. PCMs suffer from a low thermal conductivity. Under these premises the paper presents a hybrid graphene/fins/PCM cooling system to maximize efficiency gains and thermal recovery. An indoor laboratory characterization, under a solar simulator, compares the proposed model with a reference one (an identical, simple PV module) under fixed environmental conditions. Outdoor tests investigate the performances of the two systems under natural conditions. Indoor results show that the front temperature of the proposed PCM integrated module is averagely 6 °C less, with a peak of 8 °C, than the reference case. This means an increase in the electric yield of about 3%. Outdoor investigations prove that, when the PCM is solid and during the melting phase, the proposed system is averagely 1.12 °C and 4.87 °C colder than the reference case, respectively. The thermal efficiency is 30% and 65%, respectively. Once the melting process is completed, the performance becomes worse, and the hybrid panel is almost 3 °C warmer than the simple panel