Co-Simulation of IBC Type PFC Converter with Fuzzy Logic Controller

Many electronic power systems use bridge rectifiers, which are nonlinear, resulting in low power factor activity and high harmonic distortion due to the existence of nonlinear devices. To conform to harmonic standard requirements, longer device lifetime, and smooth operation of other devices in the system, power factor correction is required in these devices. The proposed system with an input power supply linked to a bridge rectifier which transforms ac to dc in this analysis, which is then linked to an Interleaved Boost Converter (IBC) with two parallel boost converters. The Interleaved Boost Converter uses Metal-Oxide-Semiconductor Field-Effect Transistor (MOSFET) to work with the switches. The proportional controller gain has the effect of minimizing the time of increase and does not remove the error of steady-state. The result of removing the steady-state error is an integral control gain but deteriorate the transient response. The fuzzy controller takes inputs from the actual signals feedback values. Using the membership functions in the fuzzification method, the data provided to the fuzzy system is transformed into linguistic variables. To evaluate the performance, a series of rules that mimic the decision-making process of the human expert running the machine is then implemented using such inference mechanisms. Finally, a defuzzification block that transforms the output to a crisp value in such a manner that both structures are consistent. The proposed method is implemented using the software of MATLAB/Simulink and PSIM. The co-simulation result shows that the power factor achieved here is 0.9988, the Total Harmonic Distortion (THD) maintained is less than 5% and the average efficiency concluded here is 98% respectively. To verify the feasibility of the proposed scheme, a prototype model of a 5kW IBC type PFC converter is developed which is converting 230V AC input voltage to 400V DC output voltage, is implemented using a Microchip IC dsPIC33FJ16GS504. The experimental results are satisfactory, which uncover that a power factor is 0.9992 (close to unity), THD is 4.11; less than 5% and 98% overall efficiency at 100 kHz switching frequency, 230Vrms input voltage. With the higher performance, as a result, topology with high switching frequency makes a more compact, but costlier converter