La/Mn codoped BaTiO3 with different La2O3 content, ranging from 0.1 to 5.0 at% La, was investigated regarding their microstructural and dielectric characteristics. The content of 0.05 at% Mn was constant in all investigated samples. The samples were sintered at 1320°C and 1350°C for two hours. Microstructural studies were done using SEM and EDS analysis. The fine-grained microstructure was obtained even for low content of La. The appearance of secondary abnormal grains with serrated features along grain boundaries was observed in 1.0 at% La-BaTiO3 sintered at 1350°C. Nearly flat permittivity-temperature response was obtained in specimens with 2.0 and 5.0 at% La. Using the modified Curie-Weiss law a critical exponent γ and C' were calculated...
Among the modified BaTiO3 La doped BaTiO3-ceramics are intensively studied because of their attracti...
In the present paper results of the dielectric investigation of barium titanate (BaTiO3) doped with ...
Lanthanum and antimony doped barium titanate powders were prepared by polymeric precursors method th...
La/Mn codoped BaTiO3 ceramics with different La2O3 content, ranging from 0.3 to 1.0 at% La, together...
La/Mn codoped BaTiO3 ceramics with different La2O3 content, ranging from 0.3 to 1.0 at% La, together...
La/Mn codoped BaTiO3 ceramics with different La2O3 content, ranging from 0.3 to 1.0 at% La, together...
Donor/acceptor (La/Mn) doped BaTiO3 ceramics, sintered at different temperatures, were studied regar...
A series of La/Mn, Sm/Mn and Dy/Mn codoped BaTiO3 samples were prepared by the conventional solid st...
Barium titanate ceramics doped with 0.3 mol.% lanthanum and co-doped with 0.3 mol.% lanthanum and 0....
Sm/Mn codoped BaTiO3 ceramics were investigated for their microstructure and dielectric characterist...
Single phase La-doped BaTiO3 with the formula Ba1-xLaxTi1-x/4O3: 0 less than or equal to x less than...
Single phase La-doped BaTiO3 with the formula Ba1-xLaxTi1-x/4O3: 0 less than or equal to x less than...
Dy/Mn doped BaTiO3 with different Dy2O3 contents, ranging from 0.1 to 5.0 at% Dy, were investigated ...
Dy/Mn doped BaTiO3 with different Dy2O3 contents, ranging from 0.1 to 5.0 at% Dy, were investigated ...
Barium titanate ceramics doped with 0.3 mol.% lanthanum and co-doped with 0.3 mol.% lanthanum and 0....
Among the modified BaTiO3 La doped BaTiO3-ceramics are intensively studied because of their attracti...
In the present paper results of the dielectric investigation of barium titanate (BaTiO3) doped with ...
Lanthanum and antimony doped barium titanate powders were prepared by polymeric precursors method th...
La/Mn codoped BaTiO3 ceramics with different La2O3 content, ranging from 0.3 to 1.0 at% La, together...
La/Mn codoped BaTiO3 ceramics with different La2O3 content, ranging from 0.3 to 1.0 at% La, together...
La/Mn codoped BaTiO3 ceramics with different La2O3 content, ranging from 0.3 to 1.0 at% La, together...
Donor/acceptor (La/Mn) doped BaTiO3 ceramics, sintered at different temperatures, were studied regar...
A series of La/Mn, Sm/Mn and Dy/Mn codoped BaTiO3 samples were prepared by the conventional solid st...
Barium titanate ceramics doped with 0.3 mol.% lanthanum and co-doped with 0.3 mol.% lanthanum and 0....
Sm/Mn codoped BaTiO3 ceramics were investigated for their microstructure and dielectric characterist...
Single phase La-doped BaTiO3 with the formula Ba1-xLaxTi1-x/4O3: 0 less than or equal to x less than...
Single phase La-doped BaTiO3 with the formula Ba1-xLaxTi1-x/4O3: 0 less than or equal to x less than...
Dy/Mn doped BaTiO3 with different Dy2O3 contents, ranging from 0.1 to 5.0 at% Dy, were investigated ...
Dy/Mn doped BaTiO3 with different Dy2O3 contents, ranging from 0.1 to 5.0 at% Dy, were investigated ...
Barium titanate ceramics doped with 0.3 mol.% lanthanum and co-doped with 0.3 mol.% lanthanum and 0....
Among the modified BaTiO3 La doped BaTiO3-ceramics are intensively studied because of their attracti...
In the present paper results of the dielectric investigation of barium titanate (BaTiO3) doped with ...
Lanthanum and antimony doped barium titanate powders were prepared by polymeric precursors method th...