Adaptive Current Protection Technology for Distribution Network with Distributed Power Sources Based on Local Information

Because the distributed power supply is connected to the distribution network, its structure has also changed the original traditional method. The original single power supply method was originally used. The network provided is a radial network and it is connected to the distributed power supply. Later, it became a structure with small- and medium-sized power supplies inside, and its network power supply became dual or multiple power supplies. Such a structural change affected the coordination of power distribution protection devices, which would impose current on the distribution network. Protection has a negative impact. This paper aims to study the adaptive current protection technology of distribution network with distributed power based on local information. On the basis of analyzing the characteristics of distributed power, the classification of distributed power, and the operation mode of distributed power, according to the access of IIDG, as well as different influences of relay protection of distribution network, an improved protection scheme with adaptive current quick-break protection as the main protection is proposed, so that different fault characteristics of the distribution network have different setting values, and then simulation experiments are carried out on this scheme. The experimental results show that the setting value of three-phase short-circuit fault proposed in this paper can well protect the protection range, which is larger than the traditional protection setting and self-adaptive setting.