Fast pyrolysis of polyurethanes and polyisocyanurate with and without flame retardant : compounds of interest for chemical recycling

To date, the recycling of polyurethane (PU) and polyisocyanurate (PIR) waste still poses a significant problem. Within this contribution, the thermal degradation of high-resilient ether PU, semirigid PU, rigid PU, and (PIR) with and without TCPP flame retardant was studied at different temperatures to identify and quantify the main products. For this, a tandem micropyrolyzer coupled to GC x GC with FID and ToF-MS detectors was used, and the yield volatiles, light gases, and residue was quantified. The volatile pyrolysis vapours obtained from pyro-lyzing high-resilient ether PU and semirigid PU at 600 degrees C were very similar, and the main products obtained were ethylene and propylene (combined yield of similar to 13 wt%), similar to 16 wt% of various oxygenates, and 4-6 wt% organic nitrogen compounds. The oxygenates included mostly poly-ether type compounds with varying molecular weight, and these are attributed to the decomposition of the polyol chains forming the soft segments of the polymer. The main semi-volatile nitrogen compound was 4,4'-methylenedianiline, attributed to the decompo-sition of the hard segments in the PU structure synthesized from MDI. The pyrolysis vapours from rigid PU contained several ether-type compounds and high yields of heteroatom-free monoaromatics-in particular sty-rene. The PIRs were more difficult to decompose and volatilize than the PUs, resulting in similar to 20 wt% higher residue yields. The charring propensity was even higher in the absence of a flame retardant in the formulation. Pyrolysis of TCPP-containing PIR produced Cl-containing pyrolysis vapours such as allyl chlorides. While the yield of H2O was comparable for the different PUs and PIR, pyrolysis of PIR produced higher yields of CO2 and less CO compared to the different PUs. The use of catalysts can help to convert PU waste pyrolysis vapours more efficiently to desirable chemicals