ABSTRACT This work describes the second of a series of studies of the effects of injection molding conditions on the mechanical and thermal properties of Polyamide 6/Glass Fiber/Montmorillonite (PA6/GF/MMT) composites and was motivated by the lack of information about how the processing variables influence on the properties of three-phase composites containing fiber glass. By this time, the effects of the injection molding temperature associated with the fiber glass percentage on the mechanical and thermal properties of the composite are investigated. Some samples were processed, following a statistical experimental factorial planning, varying the mold temperature and the fiber glass percentage and maintaining 5 wt % of the MMT. The samples...
AbstractA series of glass fiber reinforced polyester nanocomposites have been prepared with varying ...
Polypropylene/E-glass fiber/nanoclay were compounded with a twin-screw extruder and injection molded...
International audienceThe injection over-moulding of 30wt% short glass fibre reinforced PA6 (SGF fro...
This work describes the second of a series of studies of the effects of injection molding conditions...
In this study, effect of injection molding process parameters on fiber length and on mechanical prop...
Hybrid composites of PP/NC/GF were prepared by extrusion and injection molding. Molded specimens wer...
Polyamide 6 (PA6) with various loading of short glass fibres, SGF (2%, 5%, 8%, 10% & 16% Vf) were p...
ABSTRACT: In this study, the effects of varying molding conditions, including melt temperature, mold...
Polymer composites of polyamide 6,6 reinforced with short glass fibre were prepared by injection mou...
Polymer composites of polyamide 6,6 reinforced with short glass fiber were prepared by injection mol...
Nylon 6 (PA6)/Glass Mat (GM) composites and pure PA6 were prepared by compression molding technique ...
Polymer composites of polyamide 6,6 reinforced with short glass fiber were prepared by injection mol...
Hybrid composites of polypropylene (PP)/nanoclay (NC)/glass fiber (GF) were prepared byextrusion and...
The main operational characteristics of polyamide-6-montmorillonite (PA6/MMT) nanocomposites, which ...
Hybrid composites of glass fibre/nanoclay/polypropylene (PP) were prepared by extrusion and injectio...
AbstractA series of glass fiber reinforced polyester nanocomposites have been prepared with varying ...
Polypropylene/E-glass fiber/nanoclay were compounded with a twin-screw extruder and injection molded...
International audienceThe injection over-moulding of 30wt% short glass fibre reinforced PA6 (SGF fro...
This work describes the second of a series of studies of the effects of injection molding conditions...
In this study, effect of injection molding process parameters on fiber length and on mechanical prop...
Hybrid composites of PP/NC/GF were prepared by extrusion and injection molding. Molded specimens wer...
Polyamide 6 (PA6) with various loading of short glass fibres, SGF (2%, 5%, 8%, 10% & 16% Vf) were p...
ABSTRACT: In this study, the effects of varying molding conditions, including melt temperature, mold...
Polymer composites of polyamide 6,6 reinforced with short glass fibre were prepared by injection mou...
Polymer composites of polyamide 6,6 reinforced with short glass fiber were prepared by injection mol...
Nylon 6 (PA6)/Glass Mat (GM) composites and pure PA6 were prepared by compression molding technique ...
Polymer composites of polyamide 6,6 reinforced with short glass fiber were prepared by injection mol...
Hybrid composites of polypropylene (PP)/nanoclay (NC)/glass fiber (GF) were prepared byextrusion and...
The main operational characteristics of polyamide-6-montmorillonite (PA6/MMT) nanocomposites, which ...
Hybrid composites of glass fibre/nanoclay/polypropylene (PP) were prepared by extrusion and injectio...
AbstractA series of glass fiber reinforced polyester nanocomposites have been prepared with varying ...
Polypropylene/E-glass fiber/nanoclay were compounded with a twin-screw extruder and injection molded...
International audienceThe injection over-moulding of 30wt% short glass fibre reinforced PA6 (SGF fro...