Influence of Loading and Use of Occlusal Splint in Implant-Supported Fixed Prostheses

Made available in DSpace on 2019-09-12T16:53:50Z (GMT). No. of bitstreams: 0 Previous issue date: 2012The aim of the study was to assess the tensions generated in the long axis of the implants and the interimplants in the cervical, middle, and apical regions when subjected to different loads with or without interposition of the flat occlusal plane splint. A photoelastic model was made with 2 external hexagon implants located in the space corresponding to the second premolar and molar inferiors. A screw-retained metal superstructure was installed on the implants with a torque of 20 N.cm, and the set (photoelastic model with superstructure) were positioned in the circular polariscope in the dark-field configuration to observe the distribution of isochromatic fringes around the implants and interimplant areas. Photographic records were obtained before the application of the occlusal load with the following loading conditions: 300, 600, and 900 N, with and without interposition of the occlusal plane splint. The decrease in stress with the application of the flat occlusal plane splint became more evident after the application of the 600-N load. Generally, the major stress magnitude occurred in the cervical region for interimplant areas and in the apical region around implants. Use of occlusal splint in the loading of 300, 600, and 900 N reduced tension 33.22%, 66.66%, and 73.33%, respectively, in the samples. It can be concluded that the interposition of the occlusal plane splint caused a reduction in tension resulting from the simulation of occlusal overload.[Teixeira, Fabiola Marchezini; de Assis Claro, Cristiane Aparecida; Claro Neves, Ana Christina; da Silva-Concilio, Lais Regiane] Universidade de Taubaté (Unitau), Dept Prosthodont, Grad Program Dent, Sao Paulo, Brazil[Rode, Sigmar de Mello] Univ State Sao Paulo, Dept Dent Mat, Sao Jose dos Campos Dent Coll, Sao Paulo, Brazi