Add to ORKGNanocrystalline aluminum matrix composites were synthesized via hot extrusion of cryomilled 5083 Al (Al-4.59Mg-0.57Mn-0.25Fe in wt.%) blended with amorphous Al85Ni10La5 Powder. The compression yield strength of the as-extruded composite is 813 and 906 MPa for 10 and 20 vol.% Al85N10La5, respectively. The observed thermal stability is discussed in light of the mechanical behavior. (c) 2005 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved
A bulk composite with 10 wt.% B 4C, 50 wt.% coarse-grained 5083 Al and the balance nanocrystalline 5...
Nano-particle reinforced aluminum matrix composites areattractive engineering materials for many au...
Abstract An attempt was made to synthesize amorphous and/or nanocrystalline Al-based alloys from ele...
Composites with partially amorphous matrix were synthesized by mechanical alloying of an Al50Ti40Si1...
Mechanical alloying of Al-rich Al-Ni-Ti elemental powder blends by planetary ball milling up to 50 h...
Using nanocrystalline particles of mullite and zirconia respectively with diameters in the range 20-...
The structure and mechanical properties of nanocrystalline intermetallic phase dispersed amorphous m...
In this study, a nano-composite material of a nanostructured Al-based matrix reinforced with Fe40Al ...
The concept to design a composite of the 7475 alloy strengthened with particles of an amorphous alum...
The structure and mechanical properties of melt spun Al(86)Ni(9)Mm(5) alloy ribbons in both as solid...
Abstract: Mechanical alloying of Al65Cu35-xNbx (x = 5 – 25 at. % Nb) by planetary ball milling yield...
Novel Al matrix nanocomposites have been produced and studied based on a high strength nanoquasicsyt...
The paper describes composites with the matrix containing a nanocrystalline intermetallic Al13Fe4 ph...
The development of novel methods for industrial production of metal-matrix composites with improved ...
An attempt was made to synthesize amorphous and/or nanocrystalline Al-based alloys from elemental po...
A bulk composite with 10 wt.% B 4C, 50 wt.% coarse-grained 5083 Al and the balance nanocrystalline 5...
Nano-particle reinforced aluminum matrix composites areattractive engineering materials for many au...
Abstract An attempt was made to synthesize amorphous and/or nanocrystalline Al-based alloys from ele...
Composites with partially amorphous matrix were synthesized by mechanical alloying of an Al50Ti40Si1...
Mechanical alloying of Al-rich Al-Ni-Ti elemental powder blends by planetary ball milling up to 50 h...
Using nanocrystalline particles of mullite and zirconia respectively with diameters in the range 20-...
The structure and mechanical properties of nanocrystalline intermetallic phase dispersed amorphous m...
In this study, a nano-composite material of a nanostructured Al-based matrix reinforced with Fe40Al ...
The concept to design a composite of the 7475 alloy strengthened with particles of an amorphous alum...
The structure and mechanical properties of melt spun Al(86)Ni(9)Mm(5) alloy ribbons in both as solid...
Abstract: Mechanical alloying of Al65Cu35-xNbx (x = 5 – 25 at. % Nb) by planetary ball milling yield...
Novel Al matrix nanocomposites have been produced and studied based on a high strength nanoquasicsyt...
The paper describes composites with the matrix containing a nanocrystalline intermetallic Al13Fe4 ph...
The development of novel methods for industrial production of metal-matrix composites with improved ...
An attempt was made to synthesize amorphous and/or nanocrystalline Al-based alloys from elemental po...
A bulk composite with 10 wt.% B 4C, 50 wt.% coarse-grained 5083 Al and the balance nanocrystalline 5...
Nano-particle reinforced aluminum matrix composites areattractive engineering materials for many au...
Abstract An attempt was made to synthesize amorphous and/or nanocrystalline Al-based alloys from ele...