A system for microarchitecture and logic optimization

This thesis spans two levels of the design process by examining optimization at both the register-transfer level and at the logic level. More specifically, this thesis addresses the following two problems: 1) performing logic synthesis for custom layout rather than the traditional approach that focuses on synthesis for standard cells, and 2) performing optimization for custom layout from register-transfer level netlists. Thus optimization is performed on the microarchitecture design and at a lower level for individual microarchitecture components.First, techniques are introduced for generating gate-level netlists that take advantage of custom layout capabilities. Such techniques include limiting serial/parallel transistor chains, transistor sizes, and capacitive loads in forming complex gates. These considerations have not been incorporated in previous logic synthesis systems.Second, techniques are introduced for improving the microarchitecture structure and using estimates from lower-level optimization tools to guide microarchitecture design optimizations that attempt to meet user specified area and time constraints. These techniques include the capability for mixing layout styles such as custom layout for random-logic components and bit-slicing for regularly structured components. In this manner the entire design, control logic and datapath, can be optimized at the same time. Further, this paper presents a new methodology for microarchitecture-level optimization that greatly reduces the amount of technology-specific knowledge necessary to perform the optimizations