We report on a target system supporting automated positioning of nano-targets with a precision resolution of in three dimensions. It relies on a confocal distance sensor and a microscope. The system has been commissioned to position nanometer targets with 1Â Hz repetition rate. Integrating our prototype into the table-top ATLAS 300 TW-laser system at the Laboratory for Extreme Photonics in Garching, we demonstrate the operation of a 0.5Â Hz laser-driven proton source with a shot-to-shot variation of the maximum energy about 27% for a level of confidence of 0.95. The reason of laser shooting experiments operated at 0.5Â Hz rather than 1Â Hz is because the synchronization between the nano-foil target positioning system and the laser trigger n...
CLIC requires 10 μm precision and accuracy over 200m for the pre-alignment of beam related component...
Experimental results are reported for two different configurations of laser driven ion acceleration ...
Aligning accelerator components over 200m with 10 μm accuracy is a challenging task within the Compa...
We report on a target system supporting automated positioning of nano-targets with a precision resol...
We report on a target system supporting automated positioning of nano-targets with a precision resol...
We report on a target system supporting automated positioning of nano-targets with a precision resol...
A target position monitoring diagnostic, relevant to intense laser-solid interaction, is presented. ...
International audience—We developed a very simple optical sensor for centimeter range measurements w...
We present a development of a nanometrology system combining local probe microscopy and precise posi...
We present a new concept for a beam position monitor with the unique ability to map particle beam po...
Nano and micro structured thin (μ m-scale) foils were designed, fabricated and irradiated with the h...
Nano and micro structured thin (μ m-scale) foils were designed, fabricated and irradiated with the h...
Nano and micro structured thin (μ m-scale) foils were designed, fabricated and irradiated with the h...
Nano and micro structured thin (μ m-scale) foils were designed, fabricated and irradiated with the h...
Nano and micro structured thin (μ m-scale) foils were designed, fabricated and irradiated with the h...
CLIC requires 10 μm precision and accuracy over 200m for the pre-alignment of beam related component...
Experimental results are reported for two different configurations of laser driven ion acceleration ...
Aligning accelerator components over 200m with 10 μm accuracy is a challenging task within the Compa...
We report on a target system supporting automated positioning of nano-targets with a precision resol...
We report on a target system supporting automated positioning of nano-targets with a precision resol...
We report on a target system supporting automated positioning of nano-targets with a precision resol...
A target position monitoring diagnostic, relevant to intense laser-solid interaction, is presented. ...
International audience—We developed a very simple optical sensor for centimeter range measurements w...
We present a development of a nanometrology system combining local probe microscopy and precise posi...
We present a new concept for a beam position monitor with the unique ability to map particle beam po...
Nano and micro structured thin (μ m-scale) foils were designed, fabricated and irradiated with the h...
Nano and micro structured thin (μ m-scale) foils were designed, fabricated and irradiated with the h...
Nano and micro structured thin (μ m-scale) foils were designed, fabricated and irradiated with the h...
Nano and micro structured thin (μ m-scale) foils were designed, fabricated and irradiated with the h...
Nano and micro structured thin (μ m-scale) foils were designed, fabricated and irradiated with the h...
CLIC requires 10 μm precision and accuracy over 200m for the pre-alignment of beam related component...
Experimental results are reported for two different configurations of laser driven ion acceleration ...
Aligning accelerator components over 200m with 10 μm accuracy is a challenging task within the Compa...