Methods for conducting mechanical tests of sandwich construction at normal temperatures

Impact resistance of three core materials and six sandwich constructions as measured by falling-ball tests

February 1946

This report is one of a series issued in cooperation with the Army-Navy-Civil Committee on aircraft ...

Stresses induced in a sandwich panel by load applied at an insert

January 1960

This report is one of a series issued in cooperation with the Air Force-Navy-Civil Subcommittee on a...

Preliminary report on the strength of flat sandwich plates in edgewise compression

May 1947

This report is one of a series issued in cooperation with the Army-Navy-Civil Committee on aircraft ...

Methods of test for determining strength properties of core material for sandwich construction at normal temperatures

October 1948

This report is one of a series issued in cooperation with the Air Force-Navy-Civil Subcommittee on a...

Effect of elevated temperatures on the strengths of small specimens of sandwich construction of the aircraft type : tests conducted after exposure to elevated temperatures for 192 hours

January 1958

This report is one of a series issued in cooperation with the Air Force-Navy-Civil Subcommittee on a...

Effect of elevated temperatures on the strengths of small specimens of sandwich construction of the aircraft type : glass-cloth facings, balsa core -- tested immediately after the test temperature was reached

January 1958

This report is one of a series issued in cooperation with the Air Force-Navy-Civil Subcommittee on ...

Supplement to repair of aircraft sandwich constructions

May 1950

This report is one of a series issued in cooperation with the Air Force-Navy-Civil Subcommittee on a...

Repair of aircraft sandwich constructions

March 1956

This report is one of a series issued in cooperation with the Army-Navy-Civil Committee on aircraft ...

Creep tests of sandwich constructions subjected to shear at normal temperatures

May 1954

In cooperation with the U.S. Air Force.Information reviewed and reaffirmed May 1954. This report was...

Fabrication of lightweight sandwich panels of the aircraft type

March 1954

This report is one of a series issed in cooperation with Air Force-Navy-Civil Subcommittee on aircra...

Supplement to the flexural rigidity of a rectangular strip of sandwich construction

May 1952

Supplementary mathematical analysis and comparison with the results of tests.\ud \ud This report is ...

Investigation of methods of inspecting bonds between cores and faces of sandwich panels of the aircraft type

September 1947

This report is one of a series issued in cooperation with the Army-Navy-Civil Committee on aircraft ...

Sandwich Panel Manufacturing Method in Form of Test Specimens for Ship Construction

Utomo, E. (Edy)
Zubaydi, A. (Achmad)
Budipriyanto, A. (Agung)

January 2017

Sandwich panel as a composite materials require special method of manufacture, to produce the best o...

Analysis of long cylinders of sandwich construction under uniform external lateral pressure

November 1954

This report is one of a series issued in cooperation with Air Force-Navy-Civil Subcommittee on aircr...

The bending of a circular sandwich plate under normal load

January 1960

This report is one o f a series issued in cooperation with the Air Force-Navy-Civil Subcommittee on ...

Impact resistance of three core materials and six sandwich constructions as measured by falling-ball tests

February 1946

This report is one of a series issued in cooperation with the Army-Navy-Civil Committee on aircraft ...

Stresses induced in a sandwich panel by load applied at an insert

January 1960

This report is one of a series issued in cooperation with the Air Force-Navy-Civil Subcommittee on a...

Preliminary report on the strength of flat sandwich plates in edgewise compression

May 1947

This report is one of a series issued in cooperation with the Army-Navy-Civil Committee on aircraft ...

Methods of test for determining strength properties of core material for sandwich construction at normal temperatures

October 1948

This report is one of a series issued in cooperation with the Air Force-Navy-Civil Subcommittee on a...

Effect of elevated temperatures on the strengths of small specimens of sandwich construction of the aircraft type : tests conducted after exposure to elevated temperatures for 192 hours

January 1958

This report is one of a series issued in cooperation with the Air Force-Navy-Civil Subcommittee on a...

Effect of elevated temperatures on the strengths of small specimens of sandwich construction of the aircraft type : glass-cloth facings, balsa core -- tested immediately after the test temperature was reached

January 1958

This report is one of a series issued in cooperation with the Air Force-Navy-Civil Subcommittee on ...

Supplement to repair of aircraft sandwich constructions

May 1950

This report is one of a series issued in cooperation with the Air Force-Navy-Civil Subcommittee on a...

Repair of aircraft sandwich constructions

March 1956

This report is one of a series issued in cooperation with the Army-Navy-Civil Committee on aircraft ...

Creep tests of sandwich constructions subjected to shear at normal temperatures

May 1954

In cooperation with the U.S. Air Force.Information reviewed and reaffirmed May 1954. This report was...

Fabrication of lightweight sandwich panels of the aircraft type

March 1954

This report is one of a series issed in cooperation with Air Force-Navy-Civil Subcommittee on aircra...

Supplement to the flexural rigidity of a rectangular strip of sandwich construction

May 1952

Supplementary mathematical analysis and comparison with the results of tests.\ud \ud This report is ...

Investigation of methods of inspecting bonds between cores and faces of sandwich panels of the aircraft type

September 1947

This report is one of a series issued in cooperation with the Army-Navy-Civil Committee on aircraft ...

Sandwich Panel Manufacturing Method in Form of Test Specimens for Ship Construction

Utomo, E. (Edy)
Zubaydi, A. (Achmad)
Budipriyanto, A. (Agung)

January 2017

Sandwich panel as a composite materials require special method of manufacture, to produce the best o...

Analysis of long cylinders of sandwich construction under uniform external lateral pressure

November 1954

This report is one of a series issued in cooperation with Air Force-Navy-Civil Subcommittee on aircr...

The bending of a circular sandwich plate under normal load

January 1960

This report is one o f a series issued in cooperation with the Air Force-Navy-Civil Subcommittee on ...

Impact resistance of three core materials and six sandwich constructions as measured by falling-ball tests

February 1946

This report is one of a series issued in cooperation with the Army-Navy-Civil Committee on aircraft ...

Stresses induced in a sandwich panel by load applied at an insert

January 1960

This report is one of a series issued in cooperation with the Air Force-Navy-Civil Subcommittee on a...

Preliminary report on the strength of flat sandwich plates in edgewise compression

May 1947

This report is one of a series issued in cooperation with the Army-Navy-Civil Committee on aircraft ...

Methods for conducting mechanical tests of sandwich construction at normal temperatures

Abstract

Extracted data

Methods for conducting mechanical tests of sandwich construction at normal temperatures

Abstract

Extracted data

Related items

Related items