Buckling loads of flat sandwich panels in compression : Buckling of flat sandwich panels with loaded edges simply supported and the remaining edges clamped (Cores of end-grain balsa or cellular cellulose acetate and facings of aluminum or glass cloth laminate)

Effects of shear deformation in the core of a flat rectangular sandwich panel : 1. Buckling under compressive end load. 2. Deflection under uniform transverse load

August 1955

This report is one of a series issued in cooperation with the Army-Navy-Civil Committee on aircraft ...

Buckling of flat plywood plates in compression, shear, or combined compression and shear

January 1960

Information reviewed and reaffirmed 1962.\ud Original report published April 1942

Elastic stability of the facings of flat sandwich panels when subjected to combined edgewise stresses

January 1960

This report is one of a series issued in cooperation with the Air Force-Navy-Civil Subcommittee on a...

Buckling loads of flat sandwich panels in compression : Buckling of flat sandwich panels with loaded edges clamped and the remaining edges simply supported

August 1962

Information reviewed and reaffirmed August 1962. Original report dated September 1947

Buckling loads of flat sandwich panels in compression : The buckling of flat sandwich panels with either all edges simply supported or all edges clamped

August 1962

Information reviewed and reaffirmed August 1962. Original report dated March 1948

Buckling loads of flat sandwich panels in compression : Buckling of flat sandwich panels with all edges clamped

August 1962

Information reviewed and reaffirmed August 1962. Original report dated September 1947

Buckling loads of flat sandwich panels in compression : The buckling of flat sandwich panels with edges simply supported (End grain balsa cores and facings of aluminum and glass cloth laminate)

January 1960

This report is one of a series issued in cooperation withe the Army-Navy-Civil Committee on aircraft...

Buckling loads of flat sandwich panels in compression : Various types of edge conditions

January 1962

Information reviewed and reaffirmed March 1956 and 1962. Original report published in 1945

Elastic buckling of a simply supported rectangular sandwich panel subjected to combined edgewise bending and compression : results for panels with facings of either equal or unequal thickness and with orthotropic cores

August 1962

This report is one of a series issued in cooperation with the ANC-23 panel on sandwich construction ...

Edgewise compressive buckling of flat sandwich panels : loaded ends simply supported and sides supported by beams /

Zahn, John J., 1932-

"This report is one of a series issued in cooperation with the MIL-HDBK-23 Working Group on Composit...

Elastic buckling of a simply supported rectangular sandwich panel subjected to combined edgwise bending, compression, and shear

January 1962

This report is one of a series issued in cooperation with the ANC-23 panel on sandwich construction ...

Compressive buckling curves for sandwich panels with isotropic facings and isotropic or orthotropic cores

January 1958

This report is one of a series issued in cooperation with the ANC-23 panel on sandwich construction ...

Compressive buckling curves for flat sandwich panels with dissimilar facings

September 1960

This report is one of a series issued in cooperation with the ANC-23 panel on composite construction...

Compressive buckling curves for simply supported sandwich panels with glass-fabric-laminate facings and honeycomb cores

December 1958

This report is one of a series issued in cooperation with the ANC-23 panel on composite construction...

Buckling of simply supported rectangular sandwich panels subjected to edgewise bending

March 1959

This report is one of a series issued in cooperation with the ANC-23 panel on composite construction...

Effects of shear deformation in the core of a flat rectangular sandwich panel : 1. Buckling under compressive end load. 2. Deflection under uniform transverse load

August 1955

This report is one of a series issued in cooperation with the Army-Navy-Civil Committee on aircraft ...

Buckling of flat plywood plates in compression, shear, or combined compression and shear

January 1960

Information reviewed and reaffirmed 1962.\ud Original report published April 1942

Elastic stability of the facings of flat sandwich panels when subjected to combined edgewise stresses

January 1960

This report is one of a series issued in cooperation with the Air Force-Navy-Civil Subcommittee on a...

Buckling loads of flat sandwich panels in compression : Buckling of flat sandwich panels with loaded edges clamped and the remaining edges simply supported

August 1962

Information reviewed and reaffirmed August 1962. Original report dated September 1947

Buckling loads of flat sandwich panels in compression : The buckling of flat sandwich panels with either all edges simply supported or all edges clamped

August 1962

Information reviewed and reaffirmed August 1962. Original report dated March 1948

Buckling loads of flat sandwich panels in compression : Buckling of flat sandwich panels with all edges clamped

August 1962

Information reviewed and reaffirmed August 1962. Original report dated September 1947

Buckling loads of flat sandwich panels in compression : The buckling of flat sandwich panels with edges simply supported (End grain balsa cores and facings of aluminum and glass cloth laminate)

January 1960

This report is one of a series issued in cooperation withe the Army-Navy-Civil Committee on aircraft...

Buckling loads of flat sandwich panels in compression : Various types of edge conditions

January 1962

Information reviewed and reaffirmed March 1956 and 1962. Original report published in 1945

Elastic buckling of a simply supported rectangular sandwich panel subjected to combined edgewise bending and compression : results for panels with facings of either equal or unequal thickness and with orthotropic cores

August 1962

This report is one of a series issued in cooperation with the ANC-23 panel on sandwich construction ...

Edgewise compressive buckling of flat sandwich panels : loaded ends simply supported and sides supported by beams /

Zahn, John J., 1932-

"This report is one of a series issued in cooperation with the MIL-HDBK-23 Working Group on Composit...

Elastic buckling of a simply supported rectangular sandwich panel subjected to combined edgwise bending, compression, and shear

January 1962

This report is one of a series issued in cooperation with the ANC-23 panel on sandwich construction ...

Compressive buckling curves for sandwich panels with isotropic facings and isotropic or orthotropic cores

January 1958

This report is one of a series issued in cooperation with the ANC-23 panel on sandwich construction ...

Compressive buckling curves for flat sandwich panels with dissimilar facings

September 1960

This report is one of a series issued in cooperation with the ANC-23 panel on composite construction...

Compressive buckling curves for simply supported sandwich panels with glass-fabric-laminate facings and honeycomb cores

December 1958

This report is one of a series issued in cooperation with the ANC-23 panel on composite construction...

Buckling of simply supported rectangular sandwich panels subjected to edgewise bending

March 1959

This report is one of a series issued in cooperation with the ANC-23 panel on composite construction...

Effects of shear deformation in the core of a flat rectangular sandwich panel : 1. Buckling under compressive end load. 2. Deflection under uniform transverse load

August 1955

This report is one of a series issued in cooperation with the Army-Navy-Civil Committee on aircraft ...

Buckling of flat plywood plates in compression, shear, or combined compression and shear

January 1960

Information reviewed and reaffirmed 1962.\ud Original report published April 1942

Elastic stability of the facings of flat sandwich panels when subjected to combined edgewise stresses

January 1960

This report is one of a series issued in cooperation with the Air Force-Navy-Civil Subcommittee on a...

Buckling loads of flat sandwich panels in compression : Buckling of flat sandwich panels with loaded edges simply supported and the remaining edges clamped (Cores of end-grain balsa or cellular cellulose acetate and facings of aluminum or glass cloth laminate)

Abstract

Extracted data

Buckling loads of flat sandwich panels in compression : Buckling of flat sandwich panels with loaded edges simply supported and the remaining edges clamped (Cores of end-grain balsa or cellular cellulose acetate and facings of aluminum or glass cloth laminate)

Abstract

Extracted data

Related items

Related items