Comparison of different aluminium casting processes from an environmental perspective : Case study on plaster mould castings produced in Mid Sweden

While Aluminium has lots of unique properties and is seen as a material of the future, its production and manufacturing has significant environmental impacts. For complex and dimensional shapes casting remains the main manufacturing method and in this study the environmental pressure of different casting techniques is compared. A screening LCA is conducted to determine the environmental impacts of plaster mould castings in a case study at the Ventana Hackås AB foundry in Mid Sweden. The findings are compared to models of sand, pressure die and lost wax castings, based on literature datasets. The most relevant factors for the environmental performance are identified as the production of the aluminium alloy and the amount and source of energy. For plaster mould castings additionally the plaster consumption is significant, while lost wax castings are dominated by the mould production and general processes. Under similar circumstances a relatively similar performance was found for all casting techniques except the lost wax process, which is at least 3 times more emission intensive. Of the remaining techniques pressure die castings performed the best and plaster mould castings the worst, but different sources of uncertainties have been identified in this comparison. In addition a carbon footprint interface is created based on these findings, to enable specific comparisons of different casting method setups. Customizable variables allow the adaptation of three scenarios to real world conditions. As the main influencing factors the aluminium alloy, source of electricity and casting technique have been identified.2018-10-10