Cellular and Topology Optimization of Beams under Bending: An Experimental Study

Design for Additive Manufacturing (AM) includes concepts such as cellular materials and topology optimization that combine the capabilities of advanced computational design with those of AM technologies that can realize them. There is however, limited experimental study of the relative benefits of these different approaches to design. This paper examines these two different approaches, specifically in the context of maximizing the flexural rigidity of a beam under bending, while minimizing its mass. A total of 23 beams were designed using commercially available cellular design, and topology optimization software. The Selective Laser Sintering (SLS) process was used to manufacture these beams with Nylon 12, which were then tested per ASTM D790 three-point bend test standards. The effect of varying the size and shape of cells on the flexural rigidity was studied using 15 different cellular designs. These results were then compared to six different topology optimized beam designs, as well as three solid and hollow baseline beams. These preliminary findings suggest that topology optimized shapes underperform their cellular counterparts with regard to specific stiffness, and that stochastic cellular shapes deserve deeper study.Mechanical Engineerin