Process Modeling and In-Situ Monitoring of Photopolymerization for Exposure Controlled Projection Lithography (ECPL)

Exposure controlled projection lithography (ECPL) is an additive manufacturing process in which photopolymer resin is used to fabricate three-dimensional features. During this process, UV curing radiation, controlled by a dynamic mask, is projected through a transparent substrate onto the resin. COMSOL software has been used to model the photopolymerization reaction kinetics, predicting the cured part geometry based on certain process parameters. Additionally, an Interferometric Curing Monitoring (ICM) system has been implemented to acquire real-time information about the optical properties of the cured part. Potential sources of error with the real-time monitoring system were investigated. Additionally, refractive index and degree of conversion changes were modeled throughout the reaction. Measured and simulated results were compared to understand the ICM signal with the reaction kinetics. These comparisons were used to validate the simulation model and identify system level errors that must be reconciled to improve the accuracy and precision of the ECPL process.Mechanical Engineerin