Investigation of the stability of slope is significant to geotechnical engineers considering its social and economical aspects. This study aims at evaluating the effect of using two and three concrete piles in slope on the factor of safety (FOS) of the slope. SLOPE/W was used to analyze the model and the investigation was done using the Limit Equilibrium Method (LEM). The study depicts that the position and inclination angles of concrete piles in the slope have noticeable impacts on the FOS of the slope. Elevated values of FOS of the slope are obtained when two piles are placed in the middle to lower region of the slope with pile inclination angle of 45⁰, 75⁰, 90⁰ and 105⁰. Maximum value of FOS for two concrete piles in slope is aobtained f...
This paper presents results of comparative slope stability analyses conducted by limit equilibrium a...
A 3D rotational failure model for calculating the transient stability of a slope during pile driving...
Potentially unstable slopes can be treated by several measurements such as geometry changes, reinfor...
Traditionally, geotechnical engineers often use limit equilibrium method to find out the factor of s...
Slope stability can be achieved using different methods. Piles are commonly used to stabilize slopes...
AbstractSlope stability can be achieved using different methods. Piles are commonly used to stabiliz...
Slope stability is of great importance in the field of geotechnical engineering. The assessment of s...
As early as 1930, slope stability had been analyzed by limit equilibrium methods (LEM). Several meth...
Embedded stabilizing piles are new anti-slide structures that are unlike traditional stabilizing pil...
Stabilizing piles are commonly used to improve slope stability. The load that a pile should sustain ...
The objective of this research is to evaluate the stability of the natural slopes at the inlet and o...
In this research, the performance of a homogeneous slope reinforced with one row of piles is studied...
As clay slopes are prone to active landslides, piles are installed to stabilize the slope and increa...
This paper analyses the stability of a two-layers slope reinforced with a row of piles. The theory o...
Soil slope, a soil body with slant slope is a structure in civil engineering construction. If the sh...
This paper presents results of comparative slope stability analyses conducted by limit equilibrium a...
A 3D rotational failure model for calculating the transient stability of a slope during pile driving...
Potentially unstable slopes can be treated by several measurements such as geometry changes, reinfor...
Traditionally, geotechnical engineers often use limit equilibrium method to find out the factor of s...
Slope stability can be achieved using different methods. Piles are commonly used to stabilize slopes...
AbstractSlope stability can be achieved using different methods. Piles are commonly used to stabiliz...
Slope stability is of great importance in the field of geotechnical engineering. The assessment of s...
As early as 1930, slope stability had been analyzed by limit equilibrium methods (LEM). Several meth...
Embedded stabilizing piles are new anti-slide structures that are unlike traditional stabilizing pil...
Stabilizing piles are commonly used to improve slope stability. The load that a pile should sustain ...
The objective of this research is to evaluate the stability of the natural slopes at the inlet and o...
In this research, the performance of a homogeneous slope reinforced with one row of piles is studied...
As clay slopes are prone to active landslides, piles are installed to stabilize the slope and increa...
This paper analyses the stability of a two-layers slope reinforced with a row of piles. The theory o...
Soil slope, a soil body with slant slope is a structure in civil engineering construction. If the sh...
This paper presents results of comparative slope stability analyses conducted by limit equilibrium a...
A 3D rotational failure model for calculating the transient stability of a slope during pile driving...
Potentially unstable slopes can be treated by several measurements such as geometry changes, reinfor...