Add to ORKGExperimental data were obtained from eccentrically-loaded columns made of 17-7PH stainless steel and Ti 155A titanium alloy and tested at room temperature, from eccentrically-loaded columns made of 17-7PH stainless steel and tested at 1000°F, and from eccentrically-loaded tension members and columns made of Ti 155A titanium alloy and tested at 800°F. In most cases the creep tests were limited to 30 min. At the elevated temperatures the inelastic deformation was time dependent for the 17-7PH stainless steel and was mostly time independent for the Ti 155A titanium alloy. The theoretical analysis of room temperature tests data obtained from Ti 155A titanium alloy members tested at 800°F was based on the interaction curve-moment-load curve the...
Two theories were presented for constructing either moment-load or load-deflection relations as well...
To study the high strain rate shear behaviour of Ti6Al4V titanium alloy, a series of dynamic compres...
In this work, the dynamic response of Ti6Al4V alloy at high temperature was studied using the Split ...
This report presents the results of an analytical and experimental investigation for the determinati...
This report presents the results of an analytical and experimental investigation for the determinati...
This report presents the results of an analytical and experimental investigation for the determinati...
This paper presents the results of an analytical and experimental investigation for the determinatio...
Bibliography: v. 1, p. 54; v. 2, p. 23-24; v. 3, p. 22.v. 1. Eccentrically-loaded tension members ha...
A theory was presented for constructing the load-deflection relation and for determining the collaps...
A theory is presented for constructing load-creep deflection curves for beam-columns at any specifie...
A theory was presented for constructing the load-deflection relation and for determining the collaps...
The author has worked with others on ten investigations, sponsored by Wright Air Development Divisio...
The purpose of the investigation herein reported was to develop a theory for creep buckling of eccen...
Progress report on the effects of inelastic action on the resistance to various types of loads of du...
The purpose of this study is to find experimentally the buckling strength of titanium alloy (Ti.-6Al...
Two theories were presented for constructing either moment-load or load-deflection relations as well...
To study the high strain rate shear behaviour of Ti6Al4V titanium alloy, a series of dynamic compres...
In this work, the dynamic response of Ti6Al4V alloy at high temperature was studied using the Split ...
This report presents the results of an analytical and experimental investigation for the determinati...
This report presents the results of an analytical and experimental investigation for the determinati...
This report presents the results of an analytical and experimental investigation for the determinati...
This paper presents the results of an analytical and experimental investigation for the determinatio...
Bibliography: v. 1, p. 54; v. 2, p. 23-24; v. 3, p. 22.v. 1. Eccentrically-loaded tension members ha...
A theory was presented for constructing the load-deflection relation and for determining the collaps...
A theory is presented for constructing load-creep deflection curves for beam-columns at any specifie...
A theory was presented for constructing the load-deflection relation and for determining the collaps...
The author has worked with others on ten investigations, sponsored by Wright Air Development Divisio...
The purpose of the investigation herein reported was to develop a theory for creep buckling of eccen...
Progress report on the effects of inelastic action on the resistance to various types of loads of du...
The purpose of this study is to find experimentally the buckling strength of titanium alloy (Ti.-6Al...
Two theories were presented for constructing either moment-load or load-deflection relations as well...
To study the high strain rate shear behaviour of Ti6Al4V titanium alloy, a series of dynamic compres...
In this work, the dynamic response of Ti6Al4V alloy at high temperature was studied using the Split ...