Resistance measurements of thick platinum films between 4.2 and 300 K are reported. The thick films were prepared by standard screen-printing techniques. The properties of the films make them suitable for low temperature thermometry. In the temperature range 77-300 K experimental data are fitted using a quadratic fit with an error in temperature of less than 0.2%. © 1992
A new high quality 25-ohm platinum resistance thermometer with an inconel protection sheath was deve...
Publie dans : Metallurgical coatings and thin films 1990, reprinted from the Journal thin solid film...
The work focuses on measurement methods of temperature coefficient of resistance of thick-filmed pas...
The measurement characteristics of thin-Pt-film temperature sensors fabricated using advanced method...
Industrial grade platinum resistance thermometers were calibrated in the temperature range from 200°...
This paper presents recent work on complete thick-film systems, including dielectrics, conductors an...
Abstract. The most practical method of interpolation for industrial platinum thermometers is the use...
Report issued by the Bureau of Standards over platinum resistance thermometry. The advantages and li...
A method for the design, construction, calibration and testing of thin film platinum resistance temp...
Four platinum resistance thermometer data sets of resistance ratio as a function of temperature from...
Includes bibliographical references (pages [57]-58)In this study, Au, Ag, and A1 films were subjecte...
Performance of piezoresistive thick-film pressure sensors on steel substrates is hindered by the hig...
Stabilities of standard platinum resistance thermometers (SPRTs) were tested in the temperature rang...
Experiments aimed at investigating the possible factors affecting the temperature performance of thi...
This work deals with temperature characterization of Cr-Au and Ti-Au deposited resistors on quartz c...
A new high quality 25-ohm platinum resistance thermometer with an inconel protection sheath was deve...
Publie dans : Metallurgical coatings and thin films 1990, reprinted from the Journal thin solid film...
The work focuses on measurement methods of temperature coefficient of resistance of thick-filmed pas...
The measurement characteristics of thin-Pt-film temperature sensors fabricated using advanced method...
Industrial grade platinum resistance thermometers were calibrated in the temperature range from 200°...
This paper presents recent work on complete thick-film systems, including dielectrics, conductors an...
Abstract. The most practical method of interpolation for industrial platinum thermometers is the use...
Report issued by the Bureau of Standards over platinum resistance thermometry. The advantages and li...
A method for the design, construction, calibration and testing of thin film platinum resistance temp...
Four platinum resistance thermometer data sets of resistance ratio as a function of temperature from...
Includes bibliographical references (pages [57]-58)In this study, Au, Ag, and A1 films were subjecte...
Performance of piezoresistive thick-film pressure sensors on steel substrates is hindered by the hig...
Stabilities of standard platinum resistance thermometers (SPRTs) were tested in the temperature rang...
Experiments aimed at investigating the possible factors affecting the temperature performance of thi...
This work deals with temperature characterization of Cr-Au and Ti-Au deposited resistors on quartz c...
A new high quality 25-ohm platinum resistance thermometer with an inconel protection sheath was deve...
Publie dans : Metallurgical coatings and thin films 1990, reprinted from the Journal thin solid film...
The work focuses on measurement methods of temperature coefficient of resistance of thick-filmed pas...