Add to ORKGIn the present works, pulp fibers were fractionated with Bauer McNet fiber fractionators and were classified into long fiber (R30), short fiber (P30/R100) and fines (P100/R200). Water retention value (WRV), dimensions measurements and pulp viscosity of fibers were determined based on of the modified method of Thode et al. (1960), the standard method of SII 1883-1986 and TAPPI 230 om-94, respectively. The measurement of fiber dimensions were done on 200 individual fibers. The increase of short fiber fraction clearly indicated fiber shortening effect of beating process. Beating processes increased WRV of fines above that of long fiber fraction. Beating of pulp did not significantly change the derivative value of fibers, but significantly decr...
The main objective of this research is to determine the effect of beating to physical, mechanical an...
The paper and paperboard industry in Malaysia grew from 1.6% to 35% from 1993 to 2000. The growth hi...
The aim of this thesis was to study the fibre surface properties of Birch (Betula ssp.), Eucalyptus ...
The purpose of our investigation was to study the influence of the degree of beating on the physical...
Although fractionation has been widely studied, research on the reinforcement ability of different f...
Fractionation of final or semi-finished fibres gives more advanced possibilities to design pulps wit...
In this study, the kraft pulps of European black pine (Pinus nigra Arn.) and European aspen (Populus...
In this study, the kraft pulps of European black pine (Pinus nigra Arn.) and European aspen (Populus...
In this thesis, four groups of fibers with varying average fiber lengths have been separated from a ...
Typical bleached pinewood kraft pulp from a paper mill was immersed in either water or different alc...
samples were screened and submitted to the kraft cooking process. Experiments were carried out with ...
In an effort to provide a more accurate tool for verifying wood fiber species composing a pulp and p...
An investigation was conducted to evaluate the kraft pulping and wood fiber characteristics of the f...
Paper industries commonly produce pulp sourced from a mixture of pulps, rather than from a single pu...
softwood, kraft pulping, mixing, strength properties, reinforcement In this study the effects of mec...
The main objective of this research is to determine the effect of beating to physical, mechanical an...
The paper and paperboard industry in Malaysia grew from 1.6% to 35% from 1993 to 2000. The growth hi...
The aim of this thesis was to study the fibre surface properties of Birch (Betula ssp.), Eucalyptus ...
The purpose of our investigation was to study the influence of the degree of beating on the physical...
Although fractionation has been widely studied, research on the reinforcement ability of different f...
Fractionation of final or semi-finished fibres gives more advanced possibilities to design pulps wit...
In this study, the kraft pulps of European black pine (Pinus nigra Arn.) and European aspen (Populus...
In this study, the kraft pulps of European black pine (Pinus nigra Arn.) and European aspen (Populus...
In this thesis, four groups of fibers with varying average fiber lengths have been separated from a ...
Typical bleached pinewood kraft pulp from a paper mill was immersed in either water or different alc...
samples were screened and submitted to the kraft cooking process. Experiments were carried out with ...
In an effort to provide a more accurate tool for verifying wood fiber species composing a pulp and p...
An investigation was conducted to evaluate the kraft pulping and wood fiber characteristics of the f...
Paper industries commonly produce pulp sourced from a mixture of pulps, rather than from a single pu...
softwood, kraft pulping, mixing, strength properties, reinforcement In this study the effects of mec...
The main objective of this research is to determine the effect of beating to physical, mechanical an...
The paper and paperboard industry in Malaysia grew from 1.6% to 35% from 1993 to 2000. The growth hi...
The aim of this thesis was to study the fibre surface properties of Birch (Betula ssp.), Eucalyptus ...