Virtual Prototyping Platform for Multiprocessor System-on-Chip Hardware/Software Co-design and Co-verification

This paper describes the implementation of a virtual prototyping platform to address the ever-challenging multiprocessor system-on-chip (MPSoC) hardware/software co-design and co-verification requirements. The increasingly popular deployment of MPSoC brings complexity to system modeling, design, and verification. Fiercely competitive business environment makes it absolutely critical to rein in time-to-market and chip fabrication costs. The holy grail is to be able to verify the hardware design and synthesize to the gate level for physical layout, at the same time carry out software development for the hardware design using the same system models and verification platforms. One approach is to raise the abstraction level of system design and verification to ESL. In this paper, a virtual prototyping platform is built using SystemC with transaction-level modeling (TLM) and the open virtual platforms (OVP) processor model with instruction set simulator (ISS). As a demonstration of concept and feasibility, the virtual platform prototypes a 128-bit advanced encryption standard (AES) Cryptosystem MPSoC. The supporting subsystems and environment are also modeled, for example the system peripherals, the network-based interconnect scheme or Network-on-Chip (NoC), system firmware, the interrupt service handling, and driver. The virtual platform is scalable up to but not limited to twelve processing elements and configurable to the extent of the OVPs generic memory models (RAM and ROM) addresses and sizes, simulation parameters and debugging and tracing options