Studies of pulsed laser annealing (PLA) on semiconductor thin films were performed to examine changes of the optical and structural parameters due to the laser heat. Thin films of ZnS/ZnSe were deposited on quartz substrates at a pressure of 8.2*10-6 mbar using PVD technique. These thin films were annealed at different laser powers using CO2 pulsed laser. Transmission and reflection spectra were recorded before and after the annealing process. A decrease in the transmission and reflection spectra after annealing is observed. The absorption coefficient, refractive index, damping coefficient and dielectric constant were calculated before and after the annealing process. Changes in the optical parameters are found after the annealing proc...
Thin films of zinc sulphide were prepared using a flash evaporation technique. The obtained thin fil...
ZnS films were prepared by chemical bath deposition (CBD) at 25 °C without stirring. The energy gap ...
ZnSe films were deposited by pulsed laser ablation on a crystalline GaAs substrate and on an amorpho...
Studies of pulsed laser annealing (PLA) on semiconductor thin films were performed to examine change...
Samples of ZnSe of the same film thickness (320 nm) have been thermally evaporated on unheated quart...
Effects of substrate temperature on the microstructure, morphology, and optical properties of ZnS th...
Deposition of thin films of ZnSe has been performed by means of pulsed laser deposition (PLD) techni...
Effects of substrate temperature on the microstructure, morphology, and optical properties of ZnS th...
Study on the optical properties of ZnS, SnS and Se thin films in polycrystalline and amorphous stru...
The Zinc Selenide (ZnSe) thin films have been deposited on SnO2/glass substrates by a simple and ine...
International audienceThe photosensitivity of the chemical bath deposited zinc selenide (ZnSe) thin ...
ZnSe films have been deposited by pulsed laser ablation technique on Al2O3(0 0 0 1)-oriented substra...
The present work demonstrates the effect of annealing and laser irradiation on the linear, nonlinear...
Zinc sulfide (ZnS) films were deposited by chemical bath deposition (CBD) method using zinc sulphate...
ZnSe thin films were deposited by pulsed laser ablation on quartz substrate. The filmswere investiga...
Thin films of zinc sulphide were prepared using a flash evaporation technique. The obtained thin fil...
ZnS films were prepared by chemical bath deposition (CBD) at 25 °C without stirring. The energy gap ...
ZnSe films were deposited by pulsed laser ablation on a crystalline GaAs substrate and on an amorpho...
Studies of pulsed laser annealing (PLA) on semiconductor thin films were performed to examine change...
Samples of ZnSe of the same film thickness (320 nm) have been thermally evaporated on unheated quart...
Effects of substrate temperature on the microstructure, morphology, and optical properties of ZnS th...
Deposition of thin films of ZnSe has been performed by means of pulsed laser deposition (PLD) techni...
Effects of substrate temperature on the microstructure, morphology, and optical properties of ZnS th...
Study on the optical properties of ZnS, SnS and Se thin films in polycrystalline and amorphous stru...
The Zinc Selenide (ZnSe) thin films have been deposited on SnO2/glass substrates by a simple and ine...
International audienceThe photosensitivity of the chemical bath deposited zinc selenide (ZnSe) thin ...
ZnSe films have been deposited by pulsed laser ablation technique on Al2O3(0 0 0 1)-oriented substra...
The present work demonstrates the effect of annealing and laser irradiation on the linear, nonlinear...
Zinc sulfide (ZnS) films were deposited by chemical bath deposition (CBD) method using zinc sulphate...
ZnSe thin films were deposited by pulsed laser ablation on quartz substrate. The filmswere investiga...
Thin films of zinc sulphide were prepared using a flash evaporation technique. The obtained thin fil...
ZnS films were prepared by chemical bath deposition (CBD) at 25 °C without stirring. The energy gap ...
ZnSe films were deposited by pulsed laser ablation on a crystalline GaAs substrate and on an amorpho...