Study of the shear strength evolution over time of two-component backfilling grout in shield tunnelling

The two-component backfilling system is the most commonly used method to fill the annular void created during the advancement of shield machines. This unavoidable void, strictly linked to the technology of shield machines, must be filled continuously in order to avoid mostly surface displacements and lining movements. Today, this technology is the most frequently used due to operative and technical advantages, which lead to economic savings. However, despite intensive use of this backfilling technology, very little information is currently available concerning the evolution of the material in function of the curing time. Historically, the uniaxial compressive strength has been used as the main parameter for testing the compliance of a certain grout with the site-specific technical requirements, but nowadays shear strength is also starting to be considered by designers even if this topic has never been investigated.In this work, a laboratory test campaign focused on shear strength and its evolution in function of curing was performed. These tests put alight the fast mechanical growing of the two-component grout from the shear strength point of view and it should be remarked that at the current state of research there are no investigations concerning the shear strength in the context of a drainage approach.Both short and long curing times were investigated according to the direct shear test, performed under drained conditions. The Mohr-Coulomb failure envelope model was selected for the study and its widening in time highlights the peculiarity of this technology. Starting from a liquid phase at t0, values of cohesion (c’) and friction angle (φ’) grow in function of curing, reaching 126 kPa and 22° at 3 h and exceeding 270 kPa and 40° at 28 days