Evaluation of the safety parameters for a permitted explosive type emulsion

When preparing a permitted explosive recipe an energy or an explosive heat is considered, which should ensure the detonability of the system and at the same time a power that satisfies the purpose for which it will be used, under the conditions of firedamp hazardous mines. The safety parameters for the explosive charges used in the firedamp hazardous mines are decisive, in order to ensure the safety and health requirements at work together with the efficient performance of the blasting operation. The permitted explosive type emulsion is recommended to be used in underground mines, open pit mines as a special methane explosive and can be used where a coal dust and/or methane explosion hazard exists can be loaded into dry and wet blasting holes and it can be used for mechanical loading. The permitted explosive type emulsion is a Detonator-sensitive explosives that can be reliably initiated in an unconfined state by a No. 8 strength detonator it have safety handling characteristics because of the relatively low sensitivity to friction, shock and impact. Technological changes due to the change of suppliers of certified explosives for civil use for underground use in the firedamp hazardous mines, involve reassessing the safety and efficiency of the loads made with these products, which have not been tested and evaluated for the conditions from the Jiu Valley mines