In this paper, microstructure, micromagnetic structure, texture, together with magnetic properties of the hot-deformed (HD) Nd-Fe-B magnets were systematically studied to understand the deformation process and the formation mechanism of c-axis texture. The results show that the platelet grains are formed in the fine-grain regions at the initial stage of the deformation. As the amount of deformation increases, the proportion of platelet grains increases and arranges gradually, causing the formation of c-axis texture, till the grain merging occurres when the deformation is excessive. It should be noted that the rare earth-rich phase in the fine-grained region slowly diffuses to the coarse-grained region where only grain growth can be observed...
Low-melting eutectic diffusion has emerged as a practical approach to enhance the coercivity of hot ...
The microstructure of die-upset nanocomposite magnets with different height reduction was studied to...
International audienceA high speed hot forging process was applied to Nd-Fe-B and Nd-Fe-V as cast al...
In this paper, microstructure, micromagnetic structure, texture, together with magnetic properties o...
The anisotropic rate earth magnets have been produced by hot deformation by hot consolidated, melt-s...
An unusual texture formation and deformation behavior in an intermetallic compound system where disl...
An unusual texture formation and deformation behavior in an intermetallic compound system where disl...
The magnetic properties, microstructure and orientation degrees of hot pressing magnet and hot defor...
Hot deformation of Nd-Fe-B magnets has been studied for more than three decades. With a good combina...
Hot-deformed Nd-Fe-B ring magnets have wide potential applications. These ring magnets, however, exh...
Hot-deformed Nd-Pr-Fe-B-based nanocomposite magnets with different values of compressive true strain...
Hot-deformed anisotropic Nd-Fe-B magnets may potentially attain high coercivity due to their fine an...
The magnetic and mechanical properties of rare-earth magnets hot-deformed at temperature range 750-9...
Nd-Fe-B is the third generation rare-earth permanent magnet, which exhibits much better magnetic pro...
In this work, the microstructure and texture evolution of the strip cast Nd-Fe-B flake has been syst...
Low-melting eutectic diffusion has emerged as a practical approach to enhance the coercivity of hot ...
The microstructure of die-upset nanocomposite magnets with different height reduction was studied to...
International audienceA high speed hot forging process was applied to Nd-Fe-B and Nd-Fe-V as cast al...
In this paper, microstructure, micromagnetic structure, texture, together with magnetic properties o...
The anisotropic rate earth magnets have been produced by hot deformation by hot consolidated, melt-s...
An unusual texture formation and deformation behavior in an intermetallic compound system where disl...
An unusual texture formation and deformation behavior in an intermetallic compound system where disl...
The magnetic properties, microstructure and orientation degrees of hot pressing magnet and hot defor...
Hot deformation of Nd-Fe-B magnets has been studied for more than three decades. With a good combina...
Hot-deformed Nd-Fe-B ring magnets have wide potential applications. These ring magnets, however, exh...
Hot-deformed Nd-Pr-Fe-B-based nanocomposite magnets with different values of compressive true strain...
Hot-deformed anisotropic Nd-Fe-B magnets may potentially attain high coercivity due to their fine an...
The magnetic and mechanical properties of rare-earth magnets hot-deformed at temperature range 750-9...
Nd-Fe-B is the third generation rare-earth permanent magnet, which exhibits much better magnetic pro...
In this work, the microstructure and texture evolution of the strip cast Nd-Fe-B flake has been syst...
Low-melting eutectic diffusion has emerged as a practical approach to enhance the coercivity of hot ...
The microstructure of die-upset nanocomposite magnets with different height reduction was studied to...
International audienceA high speed hot forging process was applied to Nd-Fe-B and Nd-Fe-V as cast al...