International audienceEnergy storage devices are frequently employed for dynamic voltage regulation in DC nano and microgrids. For that, the power electronic interface should allow fast and accurate control of the bidirectional power flow. This requires an appropriate set of power electronics topology and control strategy. This paper focuses on a novel 5-switch DC-DC converter capable of reversing the power flow direction without changing the current direction in the intermediate inductor. A tri-state buck-boost plus free-wheeling modulation scheme is discussed. One issue with conventional PI-type controllers designed for converter models linearized around a typical operating point is their performance deteriorates as the operating point ch...
In this thesis, we investigate the development of novel control schemes for single and three phase b...
International audienceThe current massive integration of constant power loads (CPLs) requires better...
This paper shows the modeling of a linear–assisted or hybrid (linear & switching) DC–DC converters. ...
International audienceEnergy storage devices are frequently employed for dynamic voltage regulation ...
DC microgrids have shown to be a good approach for better accommodating stochastic renewable energy ...
International audienceRecent developments in power electronics and renewable energy sources have bro...
DC grid interfaces for supercapacitors (SCs) are expected to operate with a wide range of input volt...
The modulation strategy, proposed in the technical literature to control the three-switch double-inp...
This paper proposes a high-performance control strategy for dc–dc converters supplying combined load...
This report describes the design, implementation and control of a tri-state DC-DC boost converter wi...
Power electronic converters have been widely used in power system and the stability issues of DC mic...
This paper shows the modeling of a linear–assisted or hybrid (linear & switching) DC–DC converters. ...
Supercapacitors are energy storage devices that can contribute with a fast varying current for the r...
This paper focuses on the modeling, dynamic analysis, and simulation of the bidirectional DC-DC boos...
Energy storage devices such as supercapacitors and batteries are frequently used to support DC nanog...
In this thesis, we investigate the development of novel control schemes for single and three phase b...
International audienceThe current massive integration of constant power loads (CPLs) requires better...
This paper shows the modeling of a linear–assisted or hybrid (linear & switching) DC–DC converters. ...
International audienceEnergy storage devices are frequently employed for dynamic voltage regulation ...
DC microgrids have shown to be a good approach for better accommodating stochastic renewable energy ...
International audienceRecent developments in power electronics and renewable energy sources have bro...
DC grid interfaces for supercapacitors (SCs) are expected to operate with a wide range of input volt...
The modulation strategy, proposed in the technical literature to control the three-switch double-inp...
This paper proposes a high-performance control strategy for dc–dc converters supplying combined load...
This report describes the design, implementation and control of a tri-state DC-DC boost converter wi...
Power electronic converters have been widely used in power system and the stability issues of DC mic...
This paper shows the modeling of a linear–assisted or hybrid (linear & switching) DC–DC converters. ...
Supercapacitors are energy storage devices that can contribute with a fast varying current for the r...
This paper focuses on the modeling, dynamic analysis, and simulation of the bidirectional DC-DC boos...
Energy storage devices such as supercapacitors and batteries are frequently used to support DC nanog...
In this thesis, we investigate the development of novel control schemes for single and three phase b...
International audienceThe current massive integration of constant power loads (CPLs) requires better...
This paper shows the modeling of a linear–assisted or hybrid (linear & switching) DC–DC converters. ...