Energy Storage System Requirements For Shipboard Power Systems Supplying Pulsed Power Loads

Energy storage systems will likely be needed for future shipboard power systems that supply loads with high power variability such as pulsed power loads. The power generation in shipboard power systems may not be sufficient to satisfy the energy demands of the pulsed power load systems operating in conjunction with other ship service loads. Two fundamental items in evaluating the requirements of an energy storage system are the energy storage capacity and the ratings of the power conversion equipment that interfaces the energy device to the power system. The supply current of pulsed power load systems is aperiodic and cannot be described in terms of active power. Also, the RMS value and thus apparent power are only defined for periodic quantities. Therefore traditional methods of rating power equipment cannot be used. This thesis describes an approach to determine the ratings of an energy storage interface and the energy storage capacity of an energy storage device as a function of load and supply parameters. The results obtained using the proposed approach are validated with the results obtained from the simulation model of the generator supplying a pulsed power load in conjunction with an energy storage system. The energy storage system requirements for various pulsed power load profiles are obtained using the proposed approach. The method used for determining the ratings of an energy storage system utilizes an orthogonal decomposition of pulsed power load system supply current evaluated within a sliding window. The signals obtained from the decomposition are also useful in generating the control reference signals for the energy storage interface. Although the approach and methods are focused on a particular structure of the pulsed power load system, they may be generalized for use in any type of configuration of a pulsed power load system