Add to ORKGIn this study, Al-8Fe-8Si-1.4V/SiCp composites fabricated by squeeze casting process were age-hardened to study the influence of heat treatment on mechanical properties, such as hardness, bending strength and modulus of elasticity. The cast samples were solid soluted at 540 degrees C for one hour, then quenched in water to room temperature, and finally aged at 190 degrees C for 2, 4, 6, 8 and 10 hours for hardness test and at 195 degrees C for 2, 6 and 10 hours for bending strength determination
The effects of artificial aging time on the mechanical properties of Al-Si-Mg cast alloys were inves...
Al7075 alloy is the most commonly used by the aerospace industry. Al7075 alloy is characterized by i...
Aluminum matrix composites refer to the class of light weight high performance aluminum centric mate...
In this study, Al-8Fe-8Si-1.4V/SiC<sub>p</sub> composites fabricated by squeeze casting process were...
The effect of thermal ageing on the microstructure and properties of 10wt% and 20wt%SiC particulate ...
The present study is focused on the evaluation of the aging behaviour and microstructure characteriz...
AbstractThe tensile and fracture behavior of as-cast and age-hardened aluminium (6063), silicon carb...
The present study is focused on the evaluation of the aging behaviour and microstructure characteriz...
Al–Li–SiCp composites were fabricated by a modified version of the conventional stir casting techniq...
Compressive deformation of 2014 Al-alloy–SiCp composite has been compared with that of 2014 Al-alloy...
Age hardenin,g behaviour of discontinuously reinforced aluminium matrix composites has been a subjec...
Compressive deformation of 2014 Al-alloy–SiCp composite has been compared with that of 2014 Al-alloy...
Ambient temperature mechanical properties of Al-7Si/SiCp composite prepared by stir casting process ...
$Al-Li-SiC_p$ composites were fabricated by a modified version of the conventional stir casting tech...
An investigation was carried out to determine the effect of Si and Mg on ageing behavior of Al-7%Si-...
The effects of artificial aging time on the mechanical properties of Al-Si-Mg cast alloys were inves...
Al7075 alloy is the most commonly used by the aerospace industry. Al7075 alloy is characterized by i...
Aluminum matrix composites refer to the class of light weight high performance aluminum centric mate...
In this study, Al-8Fe-8Si-1.4V/SiC<sub>p</sub> composites fabricated by squeeze casting process were...
The effect of thermal ageing on the microstructure and properties of 10wt% and 20wt%SiC particulate ...
The present study is focused on the evaluation of the aging behaviour and microstructure characteriz...
AbstractThe tensile and fracture behavior of as-cast and age-hardened aluminium (6063), silicon carb...
The present study is focused on the evaluation of the aging behaviour and microstructure characteriz...
Al–Li–SiCp composites were fabricated by a modified version of the conventional stir casting techniq...
Compressive deformation of 2014 Al-alloy–SiCp composite has been compared with that of 2014 Al-alloy...
Age hardenin,g behaviour of discontinuously reinforced aluminium matrix composites has been a subjec...
Compressive deformation of 2014 Al-alloy–SiCp composite has been compared with that of 2014 Al-alloy...
Ambient temperature mechanical properties of Al-7Si/SiCp composite prepared by stir casting process ...
$Al-Li-SiC_p$ composites were fabricated by a modified version of the conventional stir casting tech...
An investigation was carried out to determine the effect of Si and Mg on ageing behavior of Al-7%Si-...
The effects of artificial aging time on the mechanical properties of Al-Si-Mg cast alloys were inves...
Al7075 alloy is the most commonly used by the aerospace industry. Al7075 alloy is characterized by i...
Aluminum matrix composites refer to the class of light weight high performance aluminum centric mate...