Influence of the Kinematic System on the Geometrical and Dimensional Accuracy of Holes in Drilling

This article attempts to show how the kinematic system affects the geometrical and dimensional accuracy of through-holes in drilling. The hole cutting tests were performed using a universal turning center. The tool was a TiAlN-coated Ø 6 mm drill bit, while the workpiece was a C45 steel cylinder with a diameter of 30 mm and a length of 30 mm. Three kinematic systems were studied. The first consisted of a fixed workpiece and a rotating and linearly moving tool. In the second, the workpiece rotated, while the tool moved linearly. The third system comprised a rotating workpiece and a rotating and linearly moving tool, but they rotated in opposite directions. The geometrical and dimensional accuracy of the hole was assessed by analyzing the cylindricity, straightness, roundness, and diameter errors. The experiment was designed using the Taguchi orthogonal array method to determine the significance of the effects of the input parameters (cutting speed, feed per revolution, and type of kinematic system) on the accuracy errors. A multifactorial statistical analysis (ANOVA) was employed for this purpose. The study revealed that all the input parameters considered had a substantial influence on the hole quality in drilling